Clairlone CLF31101SS W Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Kulkas Clairlone CLF31101SS W. Clairlone CLF31101SS W 18 halaman.

For models CLF31101W / SS (3.1 cu.ft.) and CLF45101W/SS (4.5 cu.ft.)

1. Unplug the unit and lay on its back, being careful of the power cord.

2. Remove door plate and foot from the underside of the fridge.

3. Carefully lift the refrigerator door, placing it on a padded surface to avoid scratching.

4. Unscrew the door plate (beneath freezer door) from fridge (2 door models only)

5. Remove the 2 Phillips screws which connect the upper hinge to the cabinet top.

6. Carefully lift the freezer door, placing it on a padded surface to avoid scratching.

7. Re-attach the bracket removed in step 5 to the other side of the fridge. Note the new orientation

8. Set the freezer door in its new position, making sure the hinge pin enters the bushing at the top of

the door.

9. Loosely secure the middle hinge using the parts removed in Step 4. Before tightening the screws,

make sure the top of the door is level with the cabinet top. Slide the bracket to adjust the level of

the door to match the top of the cabinet. Tighten screws.

10. Set the refrigerator door in its new position, making sure the hinge pin enters the bushing at the

bottom of the door.

11. Secure and bottom plate with the screws.

12. Check the level of the door with the door above. The level can be adjusted before tightening the

screws on the bottom plate.

13. Switch left foot to the right side and secure.