Clam Command Post 8334 Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Tenda Clam Command Post 8334. Clam Command Post 8334 5 halaman.

5. Your shelter should be standing up completely

(Photo 5). Anchor the shelter to the ice by using

the provided ice anchors and rope.

Screw two or more ice anchors into the ice several feet

away from the shelter using Clam's Ice Anchor

Installation Tool PN 8348 (not included). Use the

provided ropes to tie the hub eyelets to an anchor, and

the adjustment slides on the rope to achieve proper

tension. Next, screw two or more anchors through the

windward corners & side shelter grommets completely.

This will help keep the shelter in place. If more anchors

are needed, order PN 102457.

TAKE-DOWN INSTRUCTIONS

1. Close all windows. Leave one or both doors open

to allow air to escape.

2. Remove all ropes and ice anchors and store them

in the provided pouch. In windy conditions, remove

ice anchors after collapsing the roof and walls.

3. Push the center hub on any wall until it collapses

inward (Photo 6). Continue pushing each wall

inward until all the walls are collapsed. The shelter

will fall to the ice on its own.

4. Push the hub of the roof panels inward until they

both collapse.

5. The shelter will now be flat. Gather all corners of

the shelter and fold together (Photo 7). Do NOT

force the shelter when folding! Watch for

entanglement of poles (Photo 8).

6. Place the folded shelter and the ice anchor/rope

pouch back into the carrying case with the hubs

toward the bottom end of the bag.

Page 4

ASSEMBLY INSTRUCTIONS

TAKE-DOWN INSTRUCTIONS

Photo 8

Tangled

Untangled

Photo 5

Photo 6

Photo 7