Whirlpool WGD4900XW Panduan Penggunaan dan Perawatan - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Pengering Whirlpool WGD4900XW. Whirlpool WGD4900XW 28 halaman. 29" and 27" wide models
Juga untuk Whirlpool WGD4900XW: Buku Petunjuk (8 halaman), Panduan Petunjuk Instalasi (48 halaman)
Halaman Cetak
CYCLE GUIDE — ACCUDRY™/AUTOMATIC DRY CYCLES
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
ACCUDRY™ - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Choose ENERGY PREFERRED cycle for optimal energy savings.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select Very Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
Not all cycles and settings are available on all models.
TIMED DRY - Will run the dryer for the specified time on the control.
Items to dry:
Large or heavy items
such as thick towels or
robes
Any load
Any load
Rubber, plastic, heat
sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High heavy temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low Knits to Medium Casual temperature setting may
be used for drying medium-weight items such as sheets,
blouses, dresses, underwear, permanent press fabrics, and
some knits.
6
Dryness Level:
Temperature
Fabric:
Very Dry
High Heavy
Energy Preferred
Less Dry
Very Dry
Medium Casual
Energy Preferred
Less Dry
Very Dry
Low Knits
Energy Preferred
Less Dry
Cycle:
Temperature:
Heavy Dry
Any
Damp Dry
Any
Tumble Press
Any
®
Fluff Air
Air Only
Available
Options:
Wrinkle Shield™
Automatic cycles give the best drying
in the shortest time. Drying time varies
End of Cycle Signal
based on fabric type, load size, and
Temperature Fabric
dryness setting.
Select a drying temperature based on
Wrinkle Shield™
the fabrics in your load. If you are unsure
End of Cycle Signal
of the temperature to select for a load,
Temperature Fabric
select the lower setting rather than the
higher setting.
Wrinkle Shield™
End of Cycle Signal
Temperature Fabric
Available
Options:
Temperature Fabric
Choose high to dry large or heavy loads.
Time Adjustment
Temperature Fabric
Dries items to a damp level or for items
Time Adjustment
that do not require an entire drying
cycle.
Temperature Fabric
Use low to medium temperature to
Time Adjustment
smooth out wrinkles, such as those
found in clothes packed in a suitcase or
in items wrinkled from being left in the
dryer too long.
Temperature Fabric
No heat drying.
Time Adjustment
Use the Air Only (no heat) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Cycle Details: