Whirlpool 3LE5710XM Panduan Penggunaan & Perawatan - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Penggunaan & Perawatan untuk Pengering Whirlpool 3LE5710XM. Whirlpool 3LE5710XM 12 halaman. Automatic dryer
Juga untuk Whirlpool 3LE5710XM: Panduan Penggunaan & Perawatan (12 halaman)
Halaman Cetak
Temperature
Selector
is set on FLUFF
AIR. This setting can be used to fluff
bedding,
pillows and clothing
or to
dust drapes.
The TUMBLE PRESS setting removes
wrinkles
from dry clothing
such as
items that may have been packed
in a suitcase,
closet, or items not
removed
from the dryer.
It can also be used to damp-dry
heat sensitive
itemssuch
as plastic
shower curtains,
rubber-backed
rugs, plastic tablecloths,
foam rubber
pillows, stuffed toys, sneakers,
etc.
1. Set the Temperature
Selector to
1. Set Temperature
Selector to PERM'T
FLUFF AIR.
PRESS/HEAVY HIGH.
2. Set the Control Knob to the PERMA-
2. Set Control Knob to TUMBLE PRESS.
NENT PRESS Cycle
and select the
3. Push START Button.
number
of mintues you want,
The load will tumble
in heated
air
3. Push the START Button,
for 5 minutes. The heat shuts off and the
dryer continues
to tumble the load
Mixed loads
for 10 more minutes.
For best results, TUMBLE PRESS only a
few items at a time. Put them on hang-
ers or fold them as soon as the dryer
stops.
Drying times
Drying times will vary depending
on:
l
amount
of moisture
in the clothes.
l
type and weight
of the fabric.
l
size of load.
When drying
a load with different
l
room temperature
around
the dryer.
kinds and weights
of fabrics, use the
l
temperature
of the wash rinse water.
cycle
suggested
for the lightest fab-
l
amount
of lint in the lint screen.
rics. When the dryer stops, remove
dry
items and reset the control.
l
dryer temperature
selection.
See your "Dryer Guide"
for more
information.