Whirlpool 7MWGD1860EM0 Panduan Petunjuk Instalasi - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pengering Whirlpool 7MWGD1860EM0. Whirlpool 7MWGD1860EM0 28 halaman.

Halaman Cetak

Dryer gas pipe

The gas pipe that comes out through the rear of your dryer

■

has a 3/8" male pipe thread.

29" Wide Model

A. 3/8" NPT dryer pipe

27" Wide Model

(146 mm)

A. 3/8" NPT dryer pipe

Burner input requirements

Elevations up to 10,000 ft. (3,048 m):

The design of this dryer is certified by CSA International for

■

use at altitudes up to 10,000 ft. (3,048 m) above sea level at

the B.T.U. rating indicated on the model/serial number plate.

Burner input adjustments are not required when the dryer is

operated up to this elevation.

Elevations above 10,000 ft. (3,048 m):

When installed above 10,000 ft. (3,048 m), a 4% reduction

■

of the burner B.T.U. rating shown on the model/serial

number plate is required for each 1,000 ft. (305 m)

increase in elevation.

Gas supply pressure testing

The dryer must be disconnected from the gas supply piping

■

system during pressure testing at pressures greater than

1/2 psi.

1¼"

(32 mm)

9¼"

(235 mm)

1¼"

(32 mm)

9¼"

(235 mm)

(38 mm)

Electrical Requirements

110 - 127 Volt, 60 Hz., AC only, 15- or 20-amp fused

■

electrical supply is required. A time-delay fuse or circuit

breaker is recommended. It is also recommended that a

separate circuit serving only this dryer be provided.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected dryer:

This dryer must be grounded. In the event of malfunction or

breakdown, grounding will reduce the risk of electric shock

by providing a path of least resistance for electric current.

This dryer is equipped with a cord having an equipment-

grounding conductor and a grounding plug. The plug must

be plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local codes

and ordinances.

WARNING:

Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a quali ed electrician or service representative

or personnel if you are in doubt as to whether the dryer is

properly grounded. Do not modify the plug provided with

the dryer: if it will not t the outlet, have a proper outlet

installed by a quali ed electrician.

SAVE THESE INSTRUCTIONS