Whirlpool 7MWGD1900EW Panduan Penggunaan dan Perawatan - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Pengering Whirlpool 7MWGD1900EW. Whirlpool 7MWGD1900EW 24 halaman. Electric or gas
Halaman Cetak
3.
Select the desired ciclo (cycle)
Select the desired ciclo (cycle) for your load. See the Cycle
Guide for more information about each cycle.
CICLOS AUTOMÁTICOS (AUTOMATIC CYCLES)
You can select a different dryness level, depending on your
load, by turning the knob to dryness level.
Selecting Jeans or Muy Seco (Very Dry) or Delicado (Delicate)
or Menos Seco (Less Dry) automatically adjusts the dryness
level at which the dryer will shut off. Once a dry level is set, it
cannot be changed without stopping the cycle.
CIclos Automáticos (Automatic Cycles) give the best drying in
the shortest time. Drying time varies based on fabric type, load
size, and dryness setting.
NOTE: Jeans or Muy Seco (Very Dry) removes more
load moisture.
4.
Set ajustes de ciclo (cycle settings)
and opciones (options)
Select ajustes de ciclo (cycle settings) and opciones (options)
by turning the knob to the desired position.
NOTE: Not all options and settings are available with all cycles.
Temperatura (Temperature)
Turn the TEMPERATURA (TEMPERATURE) knob to change
the drying temperature setting. See "Setting the Drying
Temperature".
Prevención de Arrugas (Wrinkle Prevention) feature (on
some models)
Get 90 minutes of heat-free, periodic tumbling at the end of
n
a cycle. Turn the PREVENCIÓN DE ARRUGAS (WRINKLE
PREVENTION) knob to select Yes or No at any time before
the cycle has ended.
On some models with a Prevención de arrugas (Wrinkle
n
Prevention) cycle will automatically get 40 minutes of heat-
free, periodic tumbling at the end of a cycle.
5.
Select Alarma fin de ciclo
(Cycle Signal) (if desired)
Turn the ALARMA FIN DE CICLO (CYCLE SIGNAL) knob to
select the desired setting (Yes or No). The Alarma fin de ciclo
(Cycle Signal) produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
NOTE: When the Prevención de arrugas (Wrinkle Prevention)
setting is selected and the Alarma fin de ciclo (Cycle Signal)
is on, the tone will sound every 5 minutes until the clothes are
removed, or the Prevención de arrugas (Wrinkle Prevention)
setting ends.
6.
Press Cycle Signal to
begin cycle
Push and hold the ALARMA FIN DE CICLO (CYCLE SIGNAL)
knob to begin the cycle.
Promptly remove garments after cycle has completed to reduce
wrinkling. Use the Prevención de arrugas (Wrinkle Prevention)
feature to avoid wrinkling when you are unable to remove a load
from the dryer as soon as it stops.
19