Clam Fish Trap X2 Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Berkemah Clam Fish Trap X2. Clam Fish Trap X2 16 halaman. Fish trap x2

- S e a t i n g I n s t a l l a t i o n ( c o n t . ) -

Reach under the Rear Seat Bracket and slide the Latch Clip outwards and then up against the underside

of the Support Tube. Squeeze the Latch Clip into the horizontal slot of the Rear Seat Bracket.

Secure the position of the Latch Clip by pushing it into the two holes located above the horizontal slot

of the Rear Seat Bracket.

WARNING: ALWAYS KEEP THE LATCH CLIP IN THE SECURED POSITION DURING USE.

FAILURE TO DO SO COULD RESULT IN INJURY FROM THE SEAT COMING OFF OF ITS

MOUNTING SYSTEM.

Included is a Tow Rope for those not planning to install the optional Tow Hitch Assembly (available for

purchase at www.clamcorp.com.). Two install the Tow Rope, drill two 1/2" holes in the sloped front of

the Base. Knot the ends of the Tow Rope after routing through the drilled holes.