Whirlpool Duet WED9150WW0 Panduan Petunjuk Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pengering Whirlpool Duet WED9150WW0. Whirlpool Duet WED9150WW0 16 halaman. 27" electric dryer
Juga untuk Whirlpool Duet WED9150WW0: Panduan Penggunaan dan Perawatan (25 halaman)
Halaman Cetak
Parts needed:
(Not supplied with washer)
Check local codes. Check existing electrical supply and venting.
See "Electrical Requirements"
and "Venting Requirements"
before purchasing parts.
Check code requirements. Some codes limit, or do not permit,
installing dryer in garages, closets, mobile homes, or sleeping
quarters. Contact your local building inspector.
Mobile
home
= Additional
installation
requirements:
This dryer is suitable for mobile home installations. The
installation must conform to the Manufactured
Home
Construction
and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile home construction
and Safety, Title 24, HUD Part 280) or Standard CAN/CSA-Z240
MH.
Mobile home installations require:
[] Metal exhaust system hardware, available for purchase from
your dealer. For further information, see "Assistance
or
Service" section in your Use and Care Guide.
[] Special provisions must be made in mobile homes to introduce
outside air into dryer. Openings (such as a nearby window)
should be at least twice as large as dryer exhaust opening.
LOCATION
REQU[REMENWS
DRYER
DiMENSiONS
Front view:
27""
(686 mm)
35 3/8"
(899 mm)
Side view:
Left or
right
side
exhaust
67/8,,
_
(173.5 ram)
---nmD,-
J
3 1/2"
(89 mm)
Back view:
f
/------
Electric
6 1/4"
(159 mm)
i
J
T
28 1/8"
(715 ram)
3 1/2"
(89 mm)
3/411
_
(18 mm)
* Approx.
measurement
NOTE: Most installations require a minimum of 5" (127 mm)
clearance behind dryer for exhaust vent with elbow. See
"Venting Requirements."
iMPORTANT:
Do not operate, install or store dryer where
it will be exposed to water, weather, or at temperatures
below
45 ° F (7° C). Lower temperatures
may cause dryer not to
shut off at end of automatic sensor cycles, resulting in longer
drying times.
3