Whirlpool FT M10 71Y EU Panduan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Pengering Whirlpool FT M10 71Y EU. Whirlpool FT M10 71Y EU 4 halaman.

Halaman Cetak

The duration of these programs will depend on the size of the

load, types of textiles, the spin speed used in your washer and

any extra options selected. In machines equipped with display,

the duration of the cycles is shown on the control panel. The

remaining time is constantly checked and adjusted during the

drying cycle to show the best possible estimate.

Refresh

A short programme suitable for refreshing fibres and

garments by means of fresh air. Do not use with garments that are

still wet. It can be used on with any load size but is more effective

with small loads. The cycle duration is about 20 minutes.

Rapid 30'

kg 0,5 Time 30'

Ideal for drying cotton garments spun at high speed in the

washing machine.

Coloured

kg Max* Time 217'

Programme for gentle drying suitable for coloured garments.

Silk

kg 0,5 Time

Gentle drying of silk garments.

Wool

kg 1 Time 84'

Programme for drying wool clothing. It is advisable to turn

the garments inside out before drying. Leave to dry naturally the

heaviest edges that are still damp.

Delicates

kg 2

For drying delicate laundry which needs gentle treatment.

Synthetics

kg 4 Time 75'

For drying laundry made of synthetic fibres.

OPTIONS

After selecting the programme, the various options can be

set, if necessary.

Dryness Level

Press the related button several times to obtain a different

level of residual moisture on garments. An indicator signals the

level being selected.

Iron Dry: a very delicate ironing. Suitable for making ironing

of garments easier immediately after the end of the cycle.

Hanger Dry: a level intended for delicate garments ready to

be hanged.

Cupboard Dry: the garments are ready to be folded and put

away.

Extra Dry: used for garments to be worn at the end of the

cycle.

Timed drying

This option allows to set the drying time. Press the

corresponding button to set the required time for drying. After

having reached the max. settable time, a further pressure of the

button resets the option. An indicator on the control panel signals

the time being selected.

Start Delay

This option allows you to set the delay of the cycle start. Press

the corresponding button several times to obtain the required

delay. After having reached the max. settable time, the option is

reset by pressing the button again. An indicator on the control

panel signals the time being selected. After having pressed the

button Start/Pause, the machine signals the remaining time

for the cycle start. In case of door opening, after closing, it is

necessary to press the button Start/Pause.

OPTIONS BUTTONS

These buttons serves to personalise the selected programme

according to personal requirements. Not all options are available

for all programmes. Some options are incompatible with the

ones previously set. The buzzer and/or blinking indicators will

signal the incompatibility. If the option is available, the option

indicator will stay on. Some options may be kept in the memory

of the programme if selected in the previous drying.

66'

Time

60'

Rapid

Enables quicker drying.

Fresh Care+

If garments are left inside the drum after the end of the

cycle, they are subject to bacterial proliferation. This option allows

to prevent this proliferation by controlling the temperature and

the rotation of the drum. This treatment has a max. duration of 6

hours after the end of the programme set. This option remains in

memory if selected in the previous drying.

If this option is used together with the Start Delay, a crease

treatment (a periodic rotation of the drum) is added in the Start

Delay phase.

Key Lock

This option makes all machine controls inaccesible, except the

button On/Off. When the machine is on: to activate the option,

keep the button pressed until the indicator goes on. To disable the

option, keep the button pressed until the indicator goes off. This

option remains in memory if selected in the previous drying.

Cycle End

This option activates a prolonged buzzer at the end of the

cycle. Enable it if you are not sure to hear the normal sound at the

end of the cycle. This option remains in memory if selected in the

previous drying.