Whirlpool WGD7300XW Panduan Penggunaan dan Perawatan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Penggunaan dan Perawatan untuk Pengering Whirlpool WGD7300XW. Whirlpool WGD7300XW 32 halaman. Installation instructions
Juga untuk Whirlpool WGD7300XW: Panduan Petunjuk Instalasi (36 halaman)
Halaman Cetak
Additional Features
Automatic Cycle Modifiers
Use the Dryness Modifier to select dryness levels for the
Automatic Cycles. Press DRYNESS LEVEL until the desired
Dryness Level setting illuminates.
Depending on your load, you may select different drying levels.
Press the DRYNESS LEVEL button and select either, More,
Normal (Default), Less or damp. Once the dryness level has been
achieved, dryer will automatically shut off.
NOTE: Once dryness level has been set, it cannot be changed
without stopping cycle and cannot be used on Manual cycles.
Timed Cycle Modifiers
Use the Temperature Modifier to select temperatures for
the Timed Cycles. Press TEMP until the desired temperature
setting illuminates.
NOTE: Temperature modifiers cannot be used with the Auto
Dry Cycles.
Air Only
Use the Air Only Modifier for items that require drying without heat
such as rubber, plastic and heat-sensitive fabrics. This table
shows examples of items that can be dried using Air Only.
Type of Load
Foam rubber - pillows, padded bras, stuffed toys
Plastic - Shower curtains, tablecloths
Rubber-backed rugs
Olefin, polypropylene, sheer nylon
*Reset cycle to complete drying, if needed.
When using Air Only:
■
Check that coverings are securely stitched.
■
Shake and fluff pillows by hand periodically during the cycle.
■
Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Only is not available with Automatic Cycles.
Drum Light Option
On some models, select Drum Light to turn on the light inside
the dryer drum. During a cycle, if Drum Light is selected, the
drum light turns on and will remain on until DRUM LIGHT is
pressed again, the door is opened and closed, or will turn off
after 5 minutes.
When the dryer is not running, the drum light will turn on when
DRUM LIGHT is pressed or the dryer door is opened, and it will
remain on until the dryer door has been open for 5 minutes, the
dryer door is closed or DRUM LIGHT is pressed again.
Press DRUM LIGHT at any time to turn the drum light ON or OFF.
8
WRINKLE SHIELD™ Setting Option
The WRINKLE SHIELD™ setting helps keep wrinkles from forming
when you cannot unload the dryer promptly at the end of a cycle.
During this option, the dryer stops tumbling and then tumbles
again for a brief period.
■
Press the WRINKLE SHIELD™ setting to get up to
120 minutes of heat-free, periodic tumbling at the end
of a cycle.
■
Stop the WRINKLE SHIELD™ setting at any time by pressing
WRINKLE SHIELD™ setting or opening the dryer door.
■
For the Perm Press/Casual Cycle, the WRINKLE SHIELD™
setting is preset to ON. The other Automatic Cycles will retain
the WRINKLE SHIELD™ setting. For example, if you select the
WRINKLE SHIELD™ setting in the Normal cycle, the
WRINKLE SHIELD™ setting will be on the next time you
select the Normal cycle.
NOTE: If you do not select the WRINKLE SHIELD™ setting, the
dryer stops after cool down.
Damp Dry Signal Option
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing.
The Damp Dry Signal is useful when drying bedsheets/linens in
a mixed load. When the signal goes off, open the door to stop
the dryer, rearrange the load inside the dryer, close the door and
restart the dryer to finish the drying cycle. Rearranging the load
will aid in the drying process.
NOTE: The Damp Dry Signal is available only with the
Automatic Cycles.
Cycle Signal Option
The Cycle Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
Time*
cycle reduces wrinkling.
(Minutes)
Press CYCLE SIGNAL until the desired volume (Loud, Soft, or Off)
is selected.
20 - 30
NOTE: When the WRINKLE SHIELD™ setting is selected and the
Cycle Signal is on, a tone sounds every 5 minutes until the clothes
20 - 30
are removed, or the WRINKLE SHIELD™ setting ends.
40 - 50
10 - 20
Follow the progress of your dryer with the drying Status indicator
lights.
Sensing
The beginning of a cycle and turns off 5 minutes into
the cycle.
Eco Monitor
The Eco Monitor shows your estimated energy usage compared
to the other cycles and options.