Whirlpool WGD88HEAW Panduan Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengering Whirlpool WGD88HEAW. Whirlpool WGD88HEAW 44 halaman. 7.4 cu. ft. duet steam gas dryer with quad dryer baffles
Juga untuk Whirlpool WGD88HEAW: Buku Petunjuk (8 halaman), Panduan Penggunaan & Perawatan (40 halaman)

Halaman Cetak

Remove hinge and latch

Using a TORX

T25 screwdriver, remove the 3 TORX screws

securing the latch plate and latch backing plate and the

5 screws holding the hinge assembly in place.

Reinstall hinge and latch on

opposite sides

Using a TORX T25 screwdriver, reinstall the latch plate, latch

backing plate, and hinge assembly on the opposite sides from

which they were removed.

Latch

Hinge

Reinstall inner door assembly

Position the door with the inside of the door facing up.

Reinstall the 10 screws securing the inner door to the

outer door.

10.

Reinstall door on dryer

Using a TORX T25 screwdriver, remove the 4 screws on the

dryer. Insert the tabs on the hinge into the mounting slot and

slide down to engage the top tab. Secure in place with the

4 TORX T25 screws removed earlier.

Bottom

of door