Whirlpool YGEW9250SU0 Panduan Penggunaan & Perawatan - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Penggunaan & Perawatan untuk Pengering Whirlpool YGEW9250SU0. Whirlpool YGEW9250SU0 40 halaman. Electronic electric dryer
Halaman CetakINSTALLATION INSTRUCTIONS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
For a garage installation, you will need to place the 10" (25.4 cm)
pedestal at least 9" (22.9 cm) above the floor and the 13" (33 cm)
pedestal at least 6" (15.2 cm) above the floor. You will need to
place the 15.5" (39.4 cm) pedestal at least 3.5" (8.9 cm) above
the floor.
•
Flat-blade screwdriver
•
Vent clamps
•
#2 Phillips screwdriver
•
Caulking gun and
compound
(for installing
•
Adjustable wrench that
opens to 1" (2.5 cm) or
new exhaust vent)
hex-head socket wrench
•
Tin snips (new vent
(for adjusting dryer feet)
installations)
•
Level
•
1/4"nut driver or socket
wrench (recommended)
•
Tape measure
Parts supplied
Remove parts packages from dryer drum. Check that all parts are
included.
•
Parts package
4 Levering legs
NOTE: Do not use leveling legs if installing the dryer on a
pedestal.
Parts needed
Check local codes. Check existing electrical supply and venting.
See "Electrical Requirements"
and "Venting Requirements"
before purchasing parts.
•
For close-clearance
installations between 31.5" (80.01 cm)
and 37" (93.98 cm), see "Plan Vent System" section for
venting requirements.
I_-
37"
--_1
(93.98
cm)
Mobile home installations require metal exhaust system hardware
available for purchase from the dealer from whom you purchased
your dryer. For further information, please refer to the "Assistance
or Service" section of this manual.
Pedestal
Are you placing the dryer on a pedestal? You have the option of
purchasing pedestals of different heights separately for this dryer.
You may select a 10" (25.4 cm), a 13" (33 cm) or a 15.5" (39.4 cm)
pedestal. These pedestals will add to the total height of the dryer
for a total height of approximately
48" (121.9 cm), 51" (129.5 cm)
or 53.5" (135.9 cm), respectively.
Optional pedestal
The pedestals are available in several colors.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section of this manual.
Pedestal
Color
Part Number
Height
10" (25.4 cm)
White
WHP1000SQ
10" (25.4 cm)
Biscuit
WHP100OST
10" (25.4 cm)
Pewter
WHP1000SL
10" (25.4 cm)
Diamond Dust
WHP1000SU
(Silver)
13" (33 cm)
White
LAB2700MQ
13" (33 cm}
Biscuit
LAB2700MT
13" (33 cm}
Pewter
LAB2700ML
15.5" (39.4 cm)
White
WHP1500SQ
15.5" (39.4 cm)
Biscuit
WHP1500ST
15.5" (39.4 cm)
Pewter
WHP1500SL
15.5" (39.4 cm)
Diamond Dust
WHP1500SU
(Silver)
Stack Kit
Are you planning to stack your DUET _ washer and dryer? To do
so, you will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section of this manual. Ask
for Part Number 8541503.
Door Reversal
Kit
Are you planning to reverse the door swing direction on your
DUET¢_dryer? To do so, you will need to purchase a Door
Reversal Kit.
To order, call the dealer from whom you purchased your dryer or
refer to the "Assistance or Service" section of this manual. Ask
for Part Number 8530069 (Shield Blue), 8530070 (Shield
Platinum), 8530071 (Biscuit), 8530072 (Pewter) or 8579123
(Diamond Dust [Silver]).