Whirlpool YWED92HEFBD2 Panduan Petunjuk Instalasi - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Pengering Whirlpool YWED92HEFBD2. Whirlpool YWED92HEFBD2 48 halaman.

Reverse door swing: round-shaped door, curved glass – double handle

Remove door from dryer

IMPORTANT: If the protective fi lm has not yet been

removed from the dryer, peel the fi lm from the dryer door

before proceeding.

Using a T25

screwdriver, remove the four screws securing

the door hinge to the dryer and lift up and out to remove

the door. Place the door on a soft towel or other non-scratch

surface. Reinstall the four screws in the holes.

Move the door strike

Using a T25

screwdriver, remove the two screws securing

the door strike to the door frame of the dryer. Rotate the strike

180° and attach to the opposite side of dryer door frame

as shown.

Remove inner door from outer door

Position the door with the inside of the door facing up.

Using a Phillips screwdriver, remove the 10 screws securing

the inner door to the outer door. Lift off the inner door and

set aside.

Remove hinge and latch

Using a T25

screwdriver, remove the three screws securing

the latch plate and latch backing plate and the fi ve screws

holding the hinge assembly in place.

Latch

Hinge