CLARCOR UAS DPC Panduan Pemilik - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Panel Kontrol CLARCOR UAS DPC. CLARCOR UAS DPC 16 halaman. Pulse control panel

Pulse Control Panel

Revised 10/10

DPM/DPC

need to apply 8" inwc of negative pressure to the

LOW pressure port on the gauge. Nothing should be

connected to the HIGH pressure port. You can reset the

value by holding the Span key for three seconds.

The 4-20 mA process output is set to give a linear

output from 0 to the full scale pressure range of the

product. Other pressure spans such as bidirectional

or reduced ranges can be scaled with an Opti-Link

programming key. Consult the factory for details.