Whirlpool 806 Manual - Halaman 15

Jelajahi secara online atau unduh pdf Manual untuk Kap Ventilasi Whirlpool 806. Whirlpool 806 16 halaman. Evolution one cooker hood, akr 806 ix
Juga untuk Whirlpool 806: Panduan Penggunaan dan Perawatan (31 halaman)

Halaman Cetak

Grease filter cleaning required: GREEN LED FLASHING (read the instructions regarding "Reset and configuration of filter

saturation signalling" )

Carbon filters cleaning or changing required: ORANGE (amber) LED FLASHING (read the instructions regarding "Reset and

configuration of filter saturation signalling" )

Control of bottom lamps

The bottom light can be switched on or off by pressing the "light button".

Control of top lamps

To switch the top lights on or off, press (PROLONGED) the "light button".

As well as as switching on and off, PROLONGED PRESSING also allows the brightness of the lamps to be adjusted.

Note: The switching on and off (and adjustment) functions alternate.

Reset and configuration of filter saturation signalling

Switch the hood on at any speed (see section above Controllo delle velocità (potenze) di aspirazione)

Reset grease filter saturation signalling (GREEN LED FLASHING on control panel)

Firstly carry out filter maintenance as described in the relevant section.

Press (prolonged for more than 3 seconds) the "extraction power selection" button; the LED stops flashing to indicate that

signalling has been reset, and the hood switches off.

Reset carbon filter saturation signalling (ORANGE (amber) LED FLASHING)

Firstly carry out filter maintenance as described in the relevant section.

Press (prolonged for more than 3 seconds) the "extraction power selection" button; the LED stops flashing to indicate that

signalling has been reset, and the hood switches off.

Deactivation of carbon filter saturation signalling (for particular applications)

Switch off the hood (refer to section "Extraction speed (power) control")

Press (prolonged for more than 5 seconds) the "extraction power selection" button; the LED flashes GREEN to indicate that

carbon filter saturation signalling has been deactivated.

To reactivate carbon filter saturation signalling, repeat the operation, and the LED will flash ORANGE (amber).

5019 318 33271