Whirlpool AT201 Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kap Ventilasi Whirlpool AT201. Whirlpool AT201 13 halaman.

PROCEDURE

]

Find a suitable installation position of

hood which should be next to a window

and can be cut to let the exhaust duct

pass through;

If the exhaust duct has to pass through

the wall, particular attention must be paid

to the structure of the wall as steel

reinforcement may be embedded:

Mark the location of exhaust outlet hole,

then cut/drill the hole with care:

Fix the position of hood and mark the

position of the two hanging hooks:

Drive 2 steel nails into the selected wall

with 3 mm (maximum) space leave

behind for hanging the hood:

Adjust the hanging hooks on both sides

of the hood and hang the hood on the

steel nails, then adjust the hood from side

to side and from front and back to a

horizontal position;

Follow the instruction print on the

enclosed exhaust duct adapter and

connect the exhaust duct adapter to the

hood and window / wall (5-inch or 6-inch

duct can be used);

—— Exhaused air tube

Drill a hole for the air tube

Drive 2 steel nails in, on

side of the hood‫‏‬

‫ل‬

Adjust the hang hood and

prepare to install

sem, the upper corner of the both

AT201