Whirlpool Cooker hoods Panduan Pengguna dan Pemeliharaan - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna dan Pemeliharaan untuk Kap Ventilasi Whirlpool Cooker hoods. Whirlpool Cooker hoods 44 halaman. Cooker hoods
Juga untuk Whirlpool Cooker hoods: Panduan Instalasi dan Penggunaan (7 halaman)
Halaman Cetak
MAINTENANCE
ATTENTION:
GREASE FILTERS
The metal grease filter has an unlimited life and should be cleaned once a month by hand or in a dishwasher at low temperature and
with a short cycle. Cleaning in a dishwasher may cause discoloring of the grease filter, but its filtering efficiency is unaffected.
Pull out the handle to remove the filter.
Wash the filter and leave it to dry, proceeding in reverse order to refit.
REPLACING HALOGEN LAMPS
ATTENTION:
1. Disconnect the hood from the household power supply.
2. Use a small screwdriver to gently prise (at the three points indicated) the lamp cover off.
3. Remove the burnt-out lamp and fit a new one.
4. Refit (snap-on) the lamp cover.
CARBON FILTER (filter hoods only)
It retains the unpleasant odors produced during cooking.
Change the carbon filter every 4 months
Fitting or changing the carbon filter
1. Disconnect the hood from the power supply.
2. Remove the grease filters.
3. Fit one carbon filter each side, covering both protection grilles of the motor impeller. Turn
the filters clockwise to secure them to the middle pins.
Proceed in reverse order to remove.
Refit the grease filters.
- use protective gloves.
- disconnect the appliance from the power supply.
- Only use 20W MAX - G4 halogen lamps.
GB4