Whirlpool UXT5230AY Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan - Halaman 13

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan untuk Kap Ventilasi Whirlpool UXT5230AY. Whirlpool UXT5230AY 32 halaman. 30" (76.2 cm) and 36" (91.4 cm) range hood
Juga untuk Whirlpool UXT5230AY: Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan (36 halaman), Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan (32 halaman), Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan (34 halaman)

To Replace the Filter:

1. To reinstall the lter, the single slot opening on the long edge

of the lter is to be toward the front of the range hood. Place

the back edge of the lter into the channel at the rear of the

range hood.

2. Pull the lter retainer toward the front of the range hood and

push the front of the lter up into place.

3. Release the lter retainer. It will spring back into place to

secure the lter.

4. Replace the screw into the lter retainer.

Replacing the Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. To

avoid damage or decreasing the life of the new lamp, do not

touch lamp with bare ngers. Replace lamp, using tissue or

wearing cotton gloves to handle lamp.

If new lamps do not operate, make sure the lamps are inserted

correctly before calling service.

1. Disconnect power.

2. Use a at-blade screwdriver and gently pry the light cover

loose.

3. Remove the lamp and replace with a 120-volt, 40-watt

maximum, halogen lamp made for a G-9 base.

4. Replace the light cover.

5. Reconnect power.