Whirlpool UXW7230BSS Petunjuk Pemasangan Dan Panduan Penggunaan Dan Perawatan - Halaman 13

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan Dan Panduan Penggunaan Dan Perawatan untuk Kap Ventilasi Whirlpool UXW7230BSS. Whirlpool UXW7230BSS 32 halaman. 30-inch vented 400-cfm wall-mount canopy hood
Juga untuk Whirlpool UXW7230BSS: Petunjuk Pemasangan Dan Panduan Penggunaan Dan Perawatan (32 halaman), Petunjuk Pemasangan Dan Panduan Penggunaan Dan Perawatan (32 halaman)

Non-Vented (recirculating) Installation Filters

The charcoal filter is not washable. It should last up to 6 months

with normal use. Replace with Charcoal Filter Kit Number

W10272068.

To replace charcoal filter:

1. Cover the grille that covers the blower motor with the

charcoal filter so that the slots on the filter correspond to the

pins on the sides of the motor grille.

A. Charcoal filter

B. Pins

C. Blower motor

2. Turn the charcoal filter clockwise to lock it.

3. Repeat steps 1-2 on the other filter.

Replacing a Halogen Lamp

Turn off the range hood and allow the halogen lamp to cool. To

avoid damage or decreasing the life of the new bulb, do not

touch bulb with bare fingers. Replace bulb, using tissue or

wearing cotton gloves to handle bulb.

If new lamps do not operate, make sure the lamps are inserted

correctly before calling service.

1. Disconnect power.

2. Push up on the lens and turn it counterclockwise.

3. Remove the bulb and replace it with a 120-volt, 50-watt

maximum halogen bulb with a GU10 base. Turn it clockwise

to lock it into place.

4. Repeat steps 2-3 for the other bulb if needed.

5. Reconnect power.