Whirlpool WVW75UC6DS0 Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan - Halaman 10
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan Dan Panduan Penggunaan & Perawatan untuk Kap Ventilasi Whirlpool WVW75UC6DS0. Whirlpool WVW75UC6DS0 28 halaman. 30" and 36" (76.2 and 91.4 cm) wall-mount canopy range hood
Halaman Cetak
Secure the bottom of the duct with 2 - 4.2 x 8 mm screws.
1. For non-vented (recirculating)
installations only, install
charcoal filters over metal grease filter. See the "Range Hood
Care" section.
2. Install metal filters. See the "Range Hood Care" section.
3. Check the operation of the range hood blower and light. See
the "Range Hood Use" section.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.
RANGE HOOD USE
The range hood is designed to remove smoke, cooking vapors and
odors from the cooktop area. For best results, start the hood
before cooking and allow it to operate several minutes after the
cooking is complete to clear all smoke and odors from the kitchen.
The hood controls are located on the front side of the canopy.
©©O©©
A
B
C
D
E
A. On/Off LED task light button
B. Blower Off button
C. Blower speed minimum button
D. Blower speed medium button
E. Blower speed maximum button
D
Operating the LED task light
E
The On/Off light button controls both lights. Press once for On
and again for Off.
Operating
the blower
H
G
F
A. Louver holes (non-vented
[recirculating]
installations
only)
B. Duct cover
C. Control panel
D. Light switch (ambient
lighting)
E. Glass canopy
F. Perimetric
cover
G. LED lights
H. Metal grease filters (located
behind the perimetric
cover)
The Blower Speed buttons turn the blower on and control the
blower speed and sound level for quiet operation. The speed can
be changed anytime during fan operation by pressing the desired
Blower Speed button.
The Blower Off button turns the blower Off.
Operating the Ambient Lighting
The switch controls the ambient lighting.
_) Auto
off
On
1. Press to the left to turn AUTO On.
2. Press to the right to turn AMBIENT LIGHTING On.
3. Press to the center to turn AMBIENT LIGHTING or AUTO Off.
NOTE: When the Ambient Lighting is placed in the AUTO setting,
a sensor will automatically sense if it is dark in the area around the
range hood. The Ambient Lighting will turn on and stay on until it
senses there is enough light in the area around the range hood, or
the Ambient Lighting switch is placed in the ON or OFF position.
10