AER pocket tools dual mix Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat AER pocket tools dual mix. AER pocket tools dual mix 12 halaman.
Halaman Cetak
2. Safety Instructions
The following guidelines shall help minimize the risk of
injury through fire or electric shock.
1. Carefully read these safety notes before you use the
device!
2. Keep these safety notes in a safe place.
3. Pay attention to all warnings, instructions and addi-
tional texts on the unit.
4. Do not install or use your device in close proximity to
water or if you are wet yourself.
5. Use your device in a safe place where nobody can
step on cables or trip over and damage them.
6. Always pull the mains plug before cleaning your de-
vice. Use only a dry cloth for cleaning. Avoid the use
of detergents and do not let any liquids seep into the
unit.
7. Never install your device close to units with strong
electromagnetic fields such as large mains transfor-
3. Controls and
Connections
pocket tools
channel 1
channel 2
clip
clip
gain
gain
line/mic
line/mic
high
high
low
low
24V phantom power
line out
ch.2
ch.1
head
foot
dc 24 V
phones
switch
channel 1
channel 2
4
dual mix
efx
aux in
level
level
pan
master
select
DI
out
level
1 = gnd
2 = pos
3 = neg
aux in
power
mers, revolving machines, neon illumination etc. Do
not lay signal cables parallel to power current cables.
8. There are no user-serviceable components inside
the unit. To avoid the risk of an electric shock, the unit
must not be opened. All maintenance, adjustment and
repair works should be carried out by qualified staff
only. Any unauthorized tampering will void the 2-year
warranty.
9. In keeping with the EMV regulations screened cables
with correctly fitted connectors must be used for all si-
gnal connections.
10. Always use an earthed power supply with the cor-
rect mains voltage. If you are in doubt about the power
outlets ground, have it checked by a qualified techni-
cian.
11. Cable up your device only when it is powered off.
Top side
gain
input level control
clip
overload indicator
line/mic
signal source selector switch (combo socket):
line
(only via 6.3 mm jackplug) for instruments
(pickup) and other line level sources
mic
(only via XLR-connector) for microphones
high
treble control
low
bass control
efx
4-preset multi-effects unit
level
level control internal effect
pan
effect signal distribution control
select
effect select button with led-indicators
aux in
stereo-input for additional signal sources
level
stereo input level control
master
master level control
Rear side
dc 24 V
power supply connector socket (24 Volt DC)
24V phantom power
ch. 1
24V phantom power switch channel 1
ch. 2
24V phantom power switch channel 2
line out
signal output, 6.3 mm mono jack socket
headphones
stereo-headphones socket
DI out
signal output, symmetrical, XLR-socket
DI level
DI out signal level control
Front side
channel 1
signal input – combo socket for 6.3 mm mono
jackplug and XLR connector
channel 2
signal input – combo socket for 6.3 mm mono
jackplug and XLR connector
aux-in
stereo input for additional signal sources
(e.g. CD-player), RCA-sockets
(white = left channel, red = right channel),
parallel: 3.5 mm stereo jack socket
power
on/off-status indicator