Clarinet Systems EthIR LAN ES1000 Manual

Jelajahi secara online atau unduh pdf Manual untuk Titik Akses Nirkabel Clarinet Systems EthIR LAN ES1000. Clarinet Systems EthIR LAN ES1000 9 halaman. Radius

Halaman Cetak

Clarinet Systems RADIUS Technical Information

Introduction

This document describes the RADIUS support in the Clarinet Systems' EthIR LAN

It also includes the configuration of EthIR LAN , RADIUS server, PalmOS and PocketPC devices.

This document is intended for IT professionals who setup and maintain networking devices and

infrastructure in a corporate environment. Knowledge of TCP/IP, Windows networking

environment and server setup are required.

EthIR LAN R

RADIUS implementation supports MS-CHAP, CHAP and PAP authentication

protocols. Each protocol can be enabled and disabled, via our Windows Configuration tool, according

to the settings of your RADIUS server. For example, if your RADIUS server does not support MS-

CHAP, you should disable MS-CHAP in the EthIR LAN configuration. If your PDA device does not

support CHAP and only support PAP, you should enable PAP and disable MS-CHAP and CHAP.

Usually there are domain names in Windows NT environment. For Windows RADIUS server, NT

domain name is required. EthIR LAN

that do not support NT domain name can access the network.

The RADIUS server has the option of assigning an IP address to the PDA. Radius server assigned

IP address takes precedence over DHCP and static IP. This helps network admin monitoring who is

on the network via IP address

RADIUS accounting can be enabled and disabled. If it is disabled, EthIR LAN

accounting requests and wait for server response so that connection time and be shorter.

Two RADIUS servers, primary and secondary are supported.

primary server and wait for responses. If there is no response after retries, requests will be sent to

secondary server. Both servers share the same secret.

EthIR LAN RADIUS support is controlled by "key" stored in the EthIR LAN firmware. You can use

our Windows Configuration Tool to tell if an EthIR LAN

does, a RADIUS tab will be displayed (see EthIR LAN RADIUS Configuration section).

Supported Features

EthIR LAN

supports RFC2865 "Remote Authentication Dial In User Service" and RFC2866

"RADIUS Accounting" with the following packet types and attributes:

RFC2865 --

Remote Authentication Dial In User Service (RADIUS)

1. Supported Packet Types

Packet Type

Access-Request

Access-Reject

Access-Accept

Clarinet Systems, Inc.

can be configured with the NT domain name so that PDAs

EthIR LAN ! RADIUS server; authentication request

EthIR LAN " RADIUS server; authentication failed

EthIR LAN " RADIUS server; authentication passed

EthIR LAN

sends requests to

has the RADUIS support option. If it

Comment

product line.

does not send out