Clarinet Systems EtherUSB EA104 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengisi Daya Baterai Clarinet Systems EtherUSB EA104. Clarinet Systems EtherUSB EA104 15 halaman. Usb ethernet access point for pda
Juga untuk Clarinet Systems EtherUSB EA104: Spesifikasi (2 halaman), Spesifikasi (2 halaman), Panduan Pengguna (11 halaman), Panduan Pengguna (19 halaman)

Halaman Cetak

APPENDIX A – QUICK START GUIDE

This guide shows you how to quickly connect the EA-104 to your network and to PDA devices with CE5.0,

PPC2003, Windows CE.NET4.1/4.2, and Windows Mobile 5.0 and 6.0 OS.

Included in this box are:

•

EA-104 USB server

•

Power Adapter

•

Ethernet cable

Before you start ensure that:

1. You have at least one computer and a network

2. You have TCP/IP networking properly configured on your computer. Please refer to Windows help

for more information.

3. You have an Ethernet network and a spare port available on your Ethernet switch

4. You have a PDA device with a USB interface connected to the available network

Once you have all of this in place move to Step 1 below.

A.1. Connections

Connect the Ethernet cable into the 10/100 uplink port (WAN) on the rear of the EA104. Connect the

Ethernet cable into your switch or hub. Connect the power cord to the back of the unit and plug the

power supply into the wall socket or AC power source. The power LED should blink slowly on the front of

the unit - there is no on/off switch. The Network LED should now light on the front of the unit if the link is

established.

The EA104 default mode is DHCP. In a DHCP network environment EA104 will obtain one IP address

from the DHCP server after power-on. In a non-DHCP environment, the system administrator must set up

an enclosed DHCP network by accessing the EA104 configuration using the browser-based AdminTool

as described later in this guide. The power-on process takes about 25 seconds. The EA104 can be reset

to factory settings by pushing and holding the Reset Button for eight seconds or longer.

A.2. PDA connections

Now connect your USB PDA devices to the available USB ports on the back of the unit.

Clarinet Systems, Inc.

http://www.clarinetsys.com

Page 11