Bacteo Tower BT0H10S10 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Pencahayaan Bacteo Tower BT0H10S10. Bacteo Tower BT0H10S10 11 halaman.

Beginning the disinfection. After you have selected the size/duration, get ready to initiate

the disinfection process and immediately leave the room. You will have 10 seconds to leave

the room - but don't worry, the lamp will not start the disinfection process as long as there is

movement in the room.

When you are ready, press the button again and immediately start leaving the room.

Orange

LED indicator will start blinking and the lamp will continuously beep. After 10

seconds, disinfection process will begin if no movement is detected in the room.

10s

You can abort the disinfection process by pressing or rotating the button, as well as by

movement.

Note:

If the Bacteo Towers detects a fault within the UV-C lamp or internal electronics, the

disinfection process will not initiate, or it will stop immediately if in progress. The device will

continuously beep and

orange

LED indicator will blink to inform the user of malfunction.