Caldwell 795234 Petunjuk Penggunaan dan Perakitan - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan dan Perakitan untuk Aksesori Caldwell 795234. Caldwell 795234 8 halaman. Deadshot chairpod

Front Fork

Photo 7

7. Slide the Front and Rear Forks into the Rail Assembly as shown,

taking careful note of the orientation of each part. Photo 7

8. Unscrew the top Knob on the Swing-Arm Assembly and remove

the top half of the Rail Clamp. Install the Rail Assembly as shown

and then replace the top of the Clamp and re-tighten the knob.

Photo 8

9. Unfold the Legs of the Chair by pushing rmly on the frame

and pulling on the cross-bar between the legs as shown. Photo 9

10. Loosen the Clamp Lock Knob, and slide the post of the Swing-Arm Assembly into it. When the

Shooting Rail assembly is at the desired height, rmly tighten the knob to lock it into place. Photo 10

Photo 10

11. The DeadShot ChairPod is now fully assembled. Please read and understand the Usage instructions fully

before use. Photo 11

Rear Fork

Clamp Lock Knob

Rail Clamp

Photo 8

Photo 9

Photo 11