Clarion CZ305 Panduan Pemilik & Panduan Instalasi - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pemilik & Panduan Instalasi untuk Penerima Mobil Clarion CZ305. Clarion CZ305 17 halaman. Bluetooth cd/usb/mp3/wma receiver
Juga untuk Clarion CZ305: Panduan Pemilik & Panduan Instalasi (20 halaman)
Halaman Cetak
Bluetooth Operations
1. Rotate the [VOLUME] knob to select "USER
PHONEBOOK" .
2. Press the [VOLUME] knob to enter the
selected phonebook.
3. Rotate the [VOLUME] knob to scroll through
the contacts.
4. The phone number and name will scroll on
the display. When the desired contact name
is displayed, press the [VOLUME] knob to
call the phone number of that contact.
* Press the [MENU
/
] button to end the call.
Notes:
• Some mobile phones may not be able to
transfer data from the Phonebook.
• After RESET, please wait a few minutes
until the data are transferred following
Bluetooth mode selection. During that time,
"PHONEBOOK UPDATING" is shown on the
display.
• Redial
You can call the last dialed number.
Press and hold the [BAND
/
AS/ ] button (1sec).
• Call Transfer
You can switch between hands-free call and
mobile phone call.
Press the [BAND
/
AS/ ] button during the call.
• Answering a call
You can answer an incoming call by
pressing the [BAND
AS/ ] button.
/
* Press the [MENU
] button to reject an
/
incoming call.
Audio Streaming Operations
What is audio streaming?
Audio streaming is a technique for transferring
audio data such that it can be processed as
a steady and continuous stream. Users can
stream music from their external audio player
to their audio system wirelessly and listen to
the tracks through the car's speakers. Please
consult your nearest Clarion dealer for more
information on the product of wireless audio
streaming transmission offered.
14
CZ305
CAUTION
Please avoid operating your connected
mobile phone while audio streaming as
this may cause noise or choppy sound
on the song playback.
Audio streaming may or may not resume
after a telephone interruption as this is
dependent on the mobile phone.
The system will always return to Radio
mode if audio streaming is disconnected.
Note:
Be sure to read the chapter on "Pairing"
before proceeding.
Play / Pause a track
1. Push the [
] button to pause audio
playback.
2. To resume audio playback, push the
[
] button again.
Selecting a track
Track-up
1. Press the [
] button to move to the
beginning of the next track.
2. Each time the [
] button is pressed,
playback proceeds to another track in
the advancing direction.
Track-down
1. Press the [
] button to move to the
beginning of the previous track.
2. Each time the [
] button is pressed,
playback proceeds to the previous track
in the reverse direction.
Note:
Playing order will depend on the Bluetooth
audio player. When the [
] button is
pressed, some A2DP devices will restart
the current track. This depends on the
duration of playback.
D u r i n g m u s i c s t r e a m i n g p l a y b a c k ,
"A2DP" will be shown on the display.
W h e n t h e A 2 D P a n d H F P d e v i c e
i s d i s c o n n e c t e d , " B L U E T O O T H
DISCONNECT" will be shown on the display
and the system will return to the previously
selected audio source. Some Bluetooth audio
players may not have play / pause synchronized
with this unit. Please make sure both the device
and the main unit are in the same play / pause
status in BT MUSIC mode.
ID3TAG display
During music streaming playback, for music
information that is longer than the display panel:
When SCROLL is ON, the LCD will display ID3
TAG information cyclically, e.g: ALBUM->TITLE
->ARTIST...
When SCROLL is OFF, the LCD will display
one of the ID3 TAG data. The default is TRACK,
but the user can adjust it to other ID3 TAG
information by pressing the [DISP] button.
AUX Operations
The front AUX terminal of this system is
provided to allow playback of sounds and music
from external devices connected to this unit.
Press the [
SRC] button on the panel to
/
select "AUX".
AUX Input sensitivity setting
1. Press and hold the [DISP] button (1 sec.).
2. Press the [
] or [
] button to select
"AUX SENS".
3. If the output level of the connected external
audio player is "HIGH", rotate the [VOLUME]
knob and choose "MID" or "LOW". And if the
output level is "LOW", choose "MID" or "HIGH".