FIRETECH FT-SL-15 Buku Petunjuk - Halaman 8
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Pencahayaan FIRETECH FT-SL-15. FIRETECH FT-SL-15 8 halaman. Pole mounted scene lights
Halaman CetakINSTALLATION INSTRUCTIONS (AC & DC)
1. Unscrew old light from the pole, disconnect old wiring.
2. Prepare the new light by opening the junction box access cover and bringing it next to the pole.
3. Pull old wiring up and into the junction box on new light fixture, and align the threads of the new
fixture with the old pole.
4. Carefully thread the new fixture onto the old pole, being cautious as to not damage or pinch the wires while
tightening the light.
5. Tighten the light until snug, or until the fixture bottoms out in the fitting. Depending on the model of pole, tightening
the set screws may be required.
6. Once the light is securely mounted, proceed to connect wiring. BE SURE THE CIRCUIT IS NOT LIVE WHEN MAKING
CONNECTIONS.
6a. On AC fixtures, The green wire is for ground, the brown wire is for line, and the blue wire is for neutral.
6b. On DC fixtures, the red wire is for power, the black wire is for ground.
7. Before reinstalling panel cover, inspect wiring for any nicks or abrasions. Test fixture operation.
8. Once proper operation is verified, reinstall junction box access cover.
Below, Blue Sea Systems has provided a chart documenting proper wire size selections for automotive applications.
NFPA 1901 13.2.1.1 allows for up to 10% voltage drop on automotive fire apparatus. Please be sure to reference proper
HiViz LED Lighting HiViz Lighting INC PO Box 565, Naples, NC 28760 Phone: 703-662-3458 Email: [email protected]
SL-15 Product Page
conductor size below. Visit bluesea.com for more information.
8