CALECTRO Uniguard Superflow UG-3-O-MB Panduan Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Sensor Keamanan CALECTRO Uniguard Superflow UG-3-O-MB. CALECTRO Uniguard Superflow UG-3-O-MB 8 halaman.

CALECTRO Uniguard Superflow UG-3-O-MB Panduan Petunjuk Instalasi
Borra hål i kanalen:
• Håltagning utan UG-beslag, ø 38 mm.
• Håltagning med UG-beslag och/eller venturirör
med monterad fläkt, ø 51 mm (se punkt 11).
• Mät ventilationskanalens diameter.
• Kapa eventuellt röret.
• Röret bör helst täcka minst 90% av
kanalens diameter.
OBS! Se även punkt 9.
• Sätt i ändpluggen.
• Träd på tätningen på röret.
• För in röret i botten på Uniguard.
• Lås fast röret med stoppskruven.
Kapa EJ denna ände!
Do NOT cut this end!
3
Stoppskruv.
Locking screw.
1
Drill a hole in the duct:
• Without UG-bracket, ø 38 mm.
• With UG-bracket and/or venturi pipe with booster
fan, ø 51 mm (see para 11).
2
Ändplugg.
End plugg.
Tätning.
Gasket.
• Measure the diameter of the duct.
• Shorten the pipe, if necessary.
• The pipe should penetrate approx 90% of
the width of the duct.
NOTE! See para 9.
• Insert the end plug.
• Mount the black gasket on the pipe.
• Insert the pipe into the bottom of the
Uniguard.
• Secure the pipe with the locking screw.