Bad Dawg 793-1086-00 Panduan Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Derek Bad Dawg 793-1086-00. Bad Dawg 793-1086-00 12 halaman. For intimidator electric utvs with new style converters
Halaman CetakINTIMIDATOR UTV WINCH -
Figure 1: Kit Contents
Assembly Components:
Ensure that you have all of these components before beginning the installation.
1 x Winch
1 x Nylon Rope
1 x Winch Hook
1 x Fairlead
1 x Electronic Control Module
1 x Winch Control Switch
4 x Electric Connector Cables
1 x Circuit Breaker Box
1 x Switch Harness
1 x External Control Assembly
1 x Circuit Breaker Cable
1 x Hardware kit
1 x Instructions Packet (includes circuit breaker)
*
1 x Battery Assembly
*
1 x Electric UTV Harness
*
Only included with the kit specific to electric UTV's
There are several electronic components necessary for proper installation that are not
included in the winch kit, but may be found at any hardware store. They include:
3 x Female Spade Connectors
2 x Self-tapping 1" Screws
1 x Piggy-back Wire Connector
Additional Zip Ties as Necessary
Safety:
Ensure that the UTV is safely parked on level ground with the ignition off.
Wear all appropriate PPE for the following procedures.
Note:
Leave all hardware loose until the entire assembly is in its final position.
PAG E 1
|
Wi n ch I ns ta l l a t i on