FIREWOLF FW-C012 Panduan Pemilik - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alarm Karbon Monoksida FIREWOLF FW-C012. FIREWOLF FW-C012 2 halaman. Carbon monoxide gas alarm

Halaman Cetak

Figure 6. 12VDC System Multiple Alarms: Installation Wiring Diagram

NOTE:The form 'C' relay contacts may be wired either N.O. or N.C.

according to system panel requirements. These alarms are not

designed to drive auxiliary devices

9.5.4The FW-CO12 alarms do not include power supervision. This

may be accomplished by installing a power supervision relay at

the end of the alarm power circuit, such as the NAPCO FT2200

(see Figure 6 ). There is no internal backup battery.

9.6 After installing the mounting plate, place the alarm on the mount-

ing plate. Twist the alarm in the direction indicated by the "ON"

arrow on the alarm cover until it locks in place.

9.7 To make your carbon monoxide alarm tamper resistant, a locking

pin has been provided in the bag with

the screws and anchors. Using this pin

will deter children and others from

removing the alarm from the mounting

plate. To use the pin insert it into the

hole in the side of the alarm after the

alarm has been installed on the mount-

TAMPER RESISTANT LOCKING PIN

ing plate (see Figure 7). To remove the

Figure 7

alarm, use long nose pliers pull the pin

out of the hole; it is now possible to remove the alarm from the

mounting plate. Test alarm immediately following installation

and weekly for proper operation by pushing the test button until a

short beep is heard (approximately three seconds). Release the

button. The alarm will then test itself for proper operation and the

RED LED will flash 4-6 times. At completion of the self-test, the

alarm will sound 2 alarm patterns. The alarm then resumes nor-

mal operation.

9.8 This box contains two self-adhesive labels. You should write the

telephone numbers of the emergency service provider and a quali-

fied technician in the space provided on the labels. Place one

label next to the alarm, and the other label near a source of fresh

air where you plan to gather after the alarm indicates the presence

of carbon monoxide.

9.9 Attention Installer: Please leave this manual at residence for

user's information

1 1 0 0 . . 0 0 A A L L A A R R M M S S I I G G N N A A L L S S

10.1 NORMAL OPERATION

RED L.E.D. flashes once every 30 seconds, indicating that the

alarm is powered and active.

10.2 ALARM CONDITION

RED LED turns "on" for 2 seconds and "off" for 4 seconds with

4 short beeps for 1 second and 5 seconds of silence. The RED

LED will illuminate and the alarm relay will be energized (N.O.

or N.C.). Pushing and holding the test/reset button for 3 seconds

will silence the alarm for about 4 minutes. After 4 minutes, the

alarm will once again sound until the unsafe CO concentration is

reduced.

10.2.1 Connected zone should be programmed for 24 hour monitoring

and immediate response for hazardous levels of carbon monoxide.

10.2.2 Alarm RELAY output 1 form 'C' dry contacts (non-latching)

current capacity is 0.1A-30Vdc

10.3 TROUBLE CONDITION

The detector self-tests every 10 minutes. The detector will beep

and the Indicator/Test button will flash twice every 30 seconds if

a fault is detected. This is an indication of a malfunction and that

the detector requires immediate servicing.

10.3.1 Trouble RELAY output

1 form 'C' dry contacts (non-latching) current capacity is 0.1A-

30Vdc Trouble relay connection to panel is optional.

1 1 1 1 . . 0 0 M M A A I I N N T T E E N N A A N N C C E E

CLEANING YOUR ALARM:

11.1Keep your CO alarms clean–do not wash.

11.2 To clean your alarm first remove he tamper resistant locking pin

(section 9.7), then remove the alarm from the mounting bracket as

outlined in section 9.2.

11.3You can clean the interior of your alarm by using your vacuum

cleaner hose and vacuuming through the openings around the

perimeter of the alarm.

11.4The outside can be wiped with a cloth.

11.5After cleaning, reinstall your alarm and test your alarm by using

the TEST button.

11.6Test your alarms weekly and repair or replace them when they no

longer function. As with any electronic product, alarms have a

limited life and alarms that do not work cannot warn you.

WARNING: Do not use any household cleaning agents, paints,

varnishes or any other chemical on your FW-CO12 alarm.

NOTE: REGULAR TESTING IS RECOMMENDED.

1 1 2 2 . . 0 0 P P E E R R I I O O D D I I C C A A L L A A R R M M T T E E S S T T I I N N G G

Test the alarm weekly for proper operation by pushing the test but-

ton until a short beep is heard (approximately three seconds). Release

the button. The alarm will then test itself for proper operation and the

RED LED light will flash 4-6 times. At completion of the test, the

alarm will sound 2 patterns. The alarm then resumes normal opera-

tion.

IMPORTANT: If your security system is monitored by a central

station, they must be notified before the system is tested.

1 1 3 3 . . 0 0 S S E E R R V V I I C C E E A A N N D D W W A A R R R R A A N N T T Y Y

If after reviewing this manual you feel that your CO Alarm is

defective in any way, do not tamper with the unit. Contact the securi-

ty professional who installed/maintains your security system to serv-

ice the detector immediately.

333 Bayview Avenue

Amityville, New York 11701

NAPCO LIMITED WARRANTY

NAPCO SECURITY SYSTEMS, INC. (NAPCO) warrants its products to be free from manu-

facturing defects in materials and workmanship for thirty-six months following the date of

manufacture. NAPCO will, within said period, at its option, repair or replace any product fail-

ing to operate correctly without charge to the original purchaser or user.

This warranty shall not apply to any equipment, or any part thereof, which has been repaired

by others, improperly installed, improperly used, abused, altered, damaged, subjected to

acts of God, or on which any serial numbers have been altered, defaced or removed. Seller

will not be responsible for any dismantling or reinstallation charges.

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND

THE DESCRIPTION ON THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED

WARRANTY OF MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICU-

LAR PURPOSE. ADDITIONALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGA-

TIONS OR LIABILITIES ON THE PART OF NAPCO.

Any action for breach of warranty, including but not limited to any implied warranty of mer-

chantability, must be brought within the six months following the end of the warranty period.

IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR

INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,

EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELL-

ER'S OWN NEGLIGENCE OR FAULT.

In case of defect, contact the security professional who installed and maintains your securi-

ty system. In order to exercise the warranty, the product must be returned by the security

professional, shipping costs prepaid and insured to NAPCO. After repair or replacement,

NAPCO assumes the cost of returning products under warranty. NAPCO shall have no obli-

gation under this warranty, or otherwise, if the product has been repaired by others, improp-

erly installed, improperly used, abused, altered, damaged, subjected to accident, nuisance,

flood, fire or acts of God, or on which any serial numbers have been altered, defaced or

removed. NAPCO will not be responsible for any dismantling, reassembly or reinstallation

charges.

This warranty contains the entire warranty. It is the sole warranty and any prior agreements

or representations, whether oral or written, are either merged herein or are expressly can-

celled. NAPCO neither assumes, nor authorizes any other person purporting to act on its

behalf to modify, to change, or to assume for it, any other warranty or liability concerning its

products.

In no event shall NAPCO be liable for an amount in excess of NAPCO's original selling price

of the product, for any loss or damage, whether direct, indirect, incidental, consequential, or

otherwise arising out of any failure of the product. Seller's warranty, as hereinabove set forth,

shall not be enlarged, diminished or affected by and no obligation or liability shall arise or

grow out of Seller's rendering of technical advice or service in connection with Buyer's order

of the goods furnished hereunder.

NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEK-

LY.

Warning: Despite frequent testing, and due to, but not limited to, any or all of the following;

criminal tampering, electrical or communications disruption, it is possible for the system to

fail to perform as expected. NAPCO does not represent that the product/system may not be

compromised or circumvented; or that the product or system will prevent any personal injury

or property loss by burglary, robbery, fire or otherwise; nor that the product or system will in

all cases provide adequate warning or protection. A properly installed and maintained alarm

may only reduce risk of burglary, robbery, fire or otherwise but it is not insurance or a guar-

antee that these events will not occur. CONSEQUENTLY, SELLER SHALL HAVE NO LIA-

BILITY FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED

ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore, the installer should

in turn advise the consumer to take any and all precautions for his or her safety including,

but not limited to, fleeing the premises and calling police or fire department, in order to mit-

igate the possibilities of harm and/or damage.

NAPCO is not an insurer of either the property or safety of the user's family or employees,

and limits its liability for any loss or damage including incidental or consequential damages

to NAPCO's original selling price of the product regardless of the cause of such loss or dam-

age.

Some states do not allow limitations on how long an implied warranty lasts or do not allow

the exclusion or limitation of incidental or consequential damages, or differentiate in their

treatment of limitations of liability for ordinary or gross negligence, so the above limitations

or exclusions may not apply to you. This Warranty gives you specific legal rights and you

may also have other rights which vary from state to state.

WI1525 060906