ALcom AT5933 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon ALcom AT5933. ALcom AT5933 12 halaman.

Halaman Cetak
ALcom AT5933 Panduan Pengguna
2. When you hear the dial tone, dial the desired number.
3. The unit will start to time the conversation after 6 seconds.
4. When finished, return the handset to the base.
From H.F. mode
1. Press H.F. key
2. When you hear the dial tone, dial the desired number.
3. The unit will start to time the conversation after 6 seconds.
4. When finished, press H.F. key again.
Pre-dialing function
1. When the handset is on the base, dial the desired number.
2. If there are mistakes, use the DEL key to edit.
3. Press H.F. key or pick up the handset and the number will be dialed automatically.
Redial:
1. Pick up the handset or press H.F. key,
2. Press REDIAL key, the last dialed number will be dialed again
Auto-redial:
1. Press H.F. key, dial a number, if you hear an engaged tone.
2. Press ARD key and the last dialed number will be redialed automatically at every 9-10
seconds until the line is through.
3. The phone will redial the same number automatically for 32 times.
When there is an incoming call while using auto-redial, pick up the handset or press H.F. key to
answer the call. The auto redial function will be terminated.

REVIEWING, CALLING BACK AND DELETING INCOMING NUMBERS

Reviewing
On-hook state. Press UP/+ or DOWN/- key to scroll and review the numbers.
Deleting
When the desired number is shown, press DEL key, the number is deleted.
Press and hold DEL key for 3 seconds; all the incoming numbers are deleted.
Calling back
1. Scroll to the desired number, press H.F. key or pick up the handset, and the number is dialed
out, or
2. Press REDIAL key, LCD displays PICK UP,
3. Press H.F. key or pick up the handset, the number is dialed out.
NOTE: If the PABX code is set, the telephone will detect and add the code before the number
automatically when dialing back the number. It will dial the PABX code first and then after a 2
second pause and then dial the number.
If long distance code is set, and if the incoming number is more than 10 digits, the telephone will
add the long distance code ahead the number and then dial back (Except the number ahead with
4