ALcom Premium AT6206 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Telepon ALcom Premium AT6206. ALcom Premium AT6206 9 halaman. Retro

REVIEWING, CALLING BACK AND DELETING OUTGOING CALL

The phone can record 5 outgoing calls, sequence number and conversation time. You may

review, call back and delete outgoing calls. If over 5 outgoing calls, the earliest one will be

replaced. When you review outgoing call, LCD will not display real date and time, but display the

conversation time.

Reviewing

1. In on-hook or off-hook state.

2. Press OUT key, LCD displays the last dialed number.

3. Press OUT key continuously, LCD displays...END...after all outgoing numbers are reviewed.

Calling back

1. In on-hook or off-hook state.

2. Press OUT key to check the desired number.

3. Press RD key, the number will be dialed out automatically.

Deleting

1. In on-hook or off-hook state, press OUT key to check the number.

2. Press DEL key to erase it, and LCD displays the next number.

Note: Press DEL key for 3 seconds, all the outgoing calls will be erased.

MULTIFUNCTION HANDSET

The handset can be used to make and receive calls connecting it to a smart phone that has an

audio jack compatible with 3.5 mm type jack, and you can have a radiation free conversation

using the mobile phone.

Note: The telephone can be used only in hands free mode when you unplug the handset.

This handset may not be compatible and work with all smart phones.

SETTING MENU

SETTING DATE AND TIME

1. In on-hook state, press SET key, LCD displays SET 1 DATE.

2. Press SET key, the last two digits of year flash.

3. Press ▲ or ▼key to edit the year, press SET key to confirm, by using the same method to set

the month, date, hour and minute.

4. Press DEL key to quit.

NOTE: Month: 1-12 Date: 1-31 Hour: 00-23 Minute: 00-59.

SETTING LOCAL AREA CODE

1. In on-hook state, press SET key and then press ▲ key, LCD will display SET 2 CODE

2. Press SET key again, LCD displays CODE -----

3. Press ▲ or ▼ key to set the first digit of local area code.

4. Press SET key to confirm and enter the second digit setting, follow same steps to set the last

4 digits.

- 5 -