ALcom AC133UT1 Standar Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Standar Panduan Pengguna untuk Monitor ALcom AC133UT1. ALcom AC133UT1 20 halaman. 13.3

Halaman Cetak

3 13.3" ACeP Operation Manual

(1) How to connect FPC to AC133UT1

 Connect FPC of AC133UT1 to FPC connector of TCON board.
 Connect Micro USB to the HOST, we use Raspberry Pi as the HOST.
 TCON board 5V/3A power supply plug in.
 Raspberry Pi 5V/3A power supply plug in.

(2) Example of using Raspberry Pi as the HOST

After power up, needed waiting about 50s, the display will show up the E Ink logo. It
means system is running successfully.

(3) How to Change image format?

We may need to replace demo images for some situation. The rendering Tool only
support PPM format, if your files are JPG or BMP etc.... Please convert it to PPM image
format first, following we use XnView software (in Windows OS) as an example to
show how to convert other image format to PPM
 Convert other image format to PPM format (User can skip this step if user has been
prepared a lot of PPM images.)
Select image -> File -> Save as -> Select file type (PPM – Portable Pixmap)
5