3Com LS-S3100-26C-SI-AC-OVS Manual - Halaman 11
Jelajahi secara online atau unduh pdf Manual untuk Perangkat Keras Jaringan 3Com LS-S3100-26C-SI-AC-OVS. 3Com LS-S3100-26C-SI-AC-OVS 11 halaman. Loopback detection feature manual
Halaman CetakH3C Loopback Detection Feature Manual
Release 2107
By default, the loopback port auto-shutdown function is enabled on ports if the device
boots with the default configuration file (config.def); if the device boots with null
configuration, this function is disabled.
Note:
You cannot enable both the loopback port control function (with the loopback-detection
control enable command) and the loopback port auto-shutdown function on a port. If
you do so, the function configured later will take effect.
Related command: loopback-detection enable, loopback-detection control
enable.
Example
# Enable the loopback port auto-shutdown function on port Ethernet 1/0/1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] loopback-detection enable
[H3C] interface ethernet 1/0/1
[H3C-Ethernet1/0/1] loopback-detection shutdown enable
Chapter 2 Loopback Detection Configuration
2-7
Commands