ERGO-INNOVATE EI6181 Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Rak dan Dudukan ERGO-INNOVATE EI6181. ERGO-INNOVATE EI6181 12 halaman. Full motion mount

2-3 Secure the front support assembly to arm assembly/wall plate

Step 3

Attach the Arm Assembly/Wall Plate [05] to Wall

For wood stud installation, follow STEP 3A

For concrete installation, follow STEP 3B

Step 3A

Wood Stud Option

WARNING:

● Avoid potential personal injury or property damage! DO NOT over-tighten the lag

screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are pulled ﬁrmly

against the wall plate.

● Do not use wall anchor [A3] for this step

● Ensure the arm assembly/wall plate [05] is securely fastened to the

wall before continuing to the next step.

● Any material covering the wall must not exceed 5/8 in. (16 mm)

● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm) minimum

1½ x 3½ in. (38 x 89 mm)

● Stud center must be veriﬁed

3A-1

3A-2

Use a stud ﬁnder(not included)

to locate wood studs or use an

awl (not included) to verify the

edges. Mark the edge and

center locations.

Position the arm assembly/wall

plate [05] at your desired

height and line up the holes with

your stud center line. Level the

wall plate and mark the holes.

Awl

(Not lncluded)

HEAVY! You may need

assistance with this step.