AlcoSafe KX6000S-4 Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Uji AlcoSafe KX6000S-4. AlcoSafe KX6000S-4 12 halaman. Premium digital alcohol breath detector

Halaman Cetak

Error messages

Error message

REP

REP + Snr

Err

Calibration

The KX6000S-4 is calibrated during manufacture using advanced alcohol simula-

tion equipment. Known alcohol concentrations are passed through the sensor

to set baseline values for testing. During testing, the unit compares users' breath

samples to these baseline values.

The accuracy of breath alcohol testers can fluctuate after six to twelve months of

normal use, depending on the number of tests performed and operating condi-

tions.

If this product is providing inconsistent test results, is not providing any test

results, or provides unusually high or low test results, the product should be recali-

brated by a trained professional.

Please contact your local dealer for recalibration and technical support.

Cause and Course of Action

This message means insufficient or uneven blowing is

detected. Repeat 'HOW TO USE' steps 2 – 6.

This message means Sensor Not Ready (Snr) and the unit

needs another warm-up / autocleansing. It occurs when

the unit has not been used for long time / occurs when

there is alcohol residue on the sensor. Another autocleans-

ing process is needed. Repeat 'HOW TO USE' steps 2 – 6.

This message displays when the unit detected a very high

alcohol concentration (above

This message displays when the sensor has sustained dam-

age; please contact your local dealer for further support.

This message displays when Low Battery. Install two (2)

new AA alkaline batteries.

4.00‰

BAC).