Alcoscan AL7000 Panduan Pengguna - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji Alcoscan AL7000. Alcoscan AL7000 4 halaman.
Halaman Cetak
..........................................................................................................................................
How to use
Press the Power
Switch.
*. If you press and hold the Power Switch, you can check the accumulated total test counts.
..........................................................................................................................................
AL7000 is the breathalyzer that features Pre-Calibrated Alcohol Sensor Modules to eliminate the need for
recalibration.
Just snap out, snap in and you're ready to go!
Sensor Module Replacement
Please take the following steps to install new sensor module.
You can see the
Open the sensor
sensor module.
cover.
Warm up.
Blowing through
The mouthpiece
Into the unit for
4 seconds until
beep twice.
Take off PCB.
The result is
Displayed for
15 seconds.
(★ You have to turn off the power first)
Replace the new
Make sure the
sensor module into
module is
original position.
connected tightly.
Automatically
turning off.
Close the sensor
cover then test.