AerAtron AE+2 50 Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kipas angin AerAtron AE+2 50. AerAtron AE+2 50 18 halaman.

AerAtron AE+2 50 Buku Petunjuk
Pairing the Remote Control
STEP 6
Pairing a Single Fan per remote control: LEARN MODE
NOTE: Blades must be attached prior to testing the fan
1. On Receiver: Verify that the "Learn" switch is in the "O" position
2. Open battery cover & insert batteries.
3. Switch on the main power to activate the receiver, indicated
by one beep. (Energise one fan reciever at a time).
4. Within 60 seconds after the power is turned on (one beep),
press and hold the ON/OFF button on the Remote Control
(min. 3 secs.) until Fan Receiver issues three 'beeps' which
indicates successful pairing.
5. On Receiver: switch the "Learn" switch to "X" (this will
lock the pairing code with the remote)
6. Finish STEP 7, 8 & 9 and press ON/SPEED button to test
fan functions.
7. To re-pair, repeat steps 3 to 5
NOTE: Power must be off for 10 seconds min. before repairing.
The Remote Control and Fan Receiver will memorise the pairing
code for future use even if mains power is switched off.
LIGHT SWITCH: Select ON/OFF or DIMMING for the light function.
(Light will maintain last setting if turned off)
Pairing Multiple Fans per Remote Control
One remote control can control up to 8 fans (within a 7m (23") radius).On ALL receivers verify that
the "Learn" switch is in the "O" position. Switch on the mains power to activate ALL receivers at the
same time, indicated by one 'beep'. Within 60 seconds, press and hold the ON/OFF button on the
remote control (min. 3 seconds) until fan receiver issues three 'beeps'.
2a
3a
4a
2
3
The remote control is pre-programmed
!
No pairing with the receiver required
3b
1
4
Controlling the Fan
1. Fan ON/OFF
2. Fan Speed UP/DOWN
2a. Fan Speed indicator 1-6
3. Forward / Reverse
3a. Use Forward mode (counterclockwise) for cooling
3b. Use Reverse mode (clockwise)
to circulate warm air
4. Light ON/OFF
4a. To DIM, press and HOLD light button
to cycle from bright to dark.
(LIGHT SWITCH at DIMMING position)
LIGHT SWITCH
O LIGHT DIMMING
| LIGHT ON/OFF
7