Alcovisor Alpha Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Uji Alcovisor Alpha. Alcovisor Alpha 2 halaman. Fuel cell breath alcohol tester

Thank you for purchasing Alcovisor

carefully before using the products and follow the instructions when you are

using the product.

Points to Remember

1. There must be an interval of at least 20 minutes after alcohol has been

taken into the mouth. Residues of alcohol in the mouth may give false

measurements.

mouthwash, medicines and drops, as well as by belching and vomiting.

Rinsing out mouth with water or non-alcoholic drinks do not substitute for

an interval.

2. Some foods and even "non-alcoholic" drinks may contain traces of alcohol,

which will affect the test result through a "mouth alcohol" effect.

prevent this, wherever possible, ensure that a delay of about 20 minutes

has elapsed since taking anything by mouth – even medicines which may

contain alcohol. Even a glass of water prior to the test will cool the mouth

and dilute the saliva, temporarily reducing the amount of alcohol in the

breath, and, consequently, the instrument reading. A delay of at least two

minutes should take place between the time of last smoked and the test.

Operating Instruction

1. Insert 2 pcs of AA alkaline batteries.

2. Press and hold the On/Off button for 2 seconds to switch on the device.

3. The measurement unit of this device is displayed.

4. Press the On/Off button, the word "BLO" is displayed.

mouthpiece, take a deep breath and blow to the device CONTINUOUSLY.

A beeping tone will be heard and the "0" will be flashing on the LCD. Test

result will display on the LCD after a click sound. If there is no blowing

within 2 minutes, the device will switch off automatically.

5. To make a passive test, press the On/Off button during the blow.

6. Press the On/Off button once to perform another test.

Reminder: To perform a test immediately after a POSITIVE test, change

the mouthpiece and make a passive test with clear air before the test to

prevent residues.

7. Press and hold the On/Off button for 5 seconds to switch off the device.

The device will also be automatically switched off after 1 minute.

products. Please read this instruction

Such residues may be left by aromatic drinks,

Insert a