ABB RER 133 Deskripsi Teknis - Halaman 6

Jelajahi secara online atau unduh pdf Deskripsi Teknis untuk Unit Kontrol ABB RER 133. ABB RER 133 16 halaman. Bus connection module

Halaman Cetak
ABB RER 133 Deskripsi Teknis
Bus Connection
Module
3.
6
RER 133
Technical Description

General

The RER 133 Bus Connection Module acts as an interfacing unit between an
RE_54_ host device and a SPA, Modbus or DNP 3.0 system. The RER 133 module
converts RS-232 signals to RS-485 signals. RS-485 can be connected by using 2- or
4-wire mode.
The RER 133 module is connected by a cable to the RS-232 D-type connector
marked X3.2 on the rear panel of the RE_ 54_ host device. RER 133 is not a stand
alone device. An RE_ 54_ host device is always required to power the module. No
external power supply is supported.
RER 133 supports communication speeds from 300 to 19200 bits/s. Collision
detection and collision avoidance is supported for communication speeds 4800,
9600 and 19200 bits/s.
A RER 133 delivery includes the RER 133 Bus Connection Module, a connection
cable (1MRS120542) and this manual.
1MRS755163