Direct IP DC-E4213WRX Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kamera Keamanan Direct IP DC-E4213WRX. Direct IP DC-E4213WRX 18 halaman.
Juga untuk Direct IP DC-E4213WRX: Panduan Cepat (17 halaman)

Halaman Cetak

Safety Precautions

Important Safeguards

1. Read Instructions

All the safety and operating instructions should be read before the

appliance is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future

reference.

3. Cleaning

Unplug this equipment from the wall outlet before cleaning it. Do not

use liquid aerosol cleaners. Use a damp soft cloth for cleaning.

4. Attachments

Never add any attachments and/or equipment without the approval

of the manufacturer as such additions may result in the risk of fire,

electric shock or other personal injury.

5. Placing and Accessories

Do not place this equipment on an wall or ceiling that is not strong

enough to sustain the camera. The equipment may fall, causing

serious injury to a child or adult, and serious damage to the

equipment. Wall or shelf mounting should follow the manufacturer's

instructions, and should use a mounting kit approved by the

manufacturer.

This equipment and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

equipment and cart combination to overturn.

Do not place this equipment in an enclosed space. Sufficient

ventilation is required to prevent an increase in ambient temperature

which can cause malfunction or the risk of fire.

6. Power Sources

This equipment should be operated only from the type of power

source indicated on the marking label. If you are not sure of the

type of power, please consult your equipment dealer or local power

company.

You may want to install a UPS (Uninterruptible Power Supply)

system for safe operation in order to prevent damage caused by an

unexpected power stoppage. Any questions concerning UPS, consult

your UPS retailer.

7. Power Cord

Operator or installer must remove power and TNT connections before

handling the equipment.

8. Lightning

For added protection for this equipment during a lightning storm,

or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable

system. This will prevent damage to the equipment due to lightning

and power-line surges. If thunder or lightning is common where the

equipment is installed, use a surge protection device.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

9. Overloading

Do not overload wall outlets and extension cords as this can result in

the risk of fire or electric shock.

10. Objects and Liquids

Never push objects of any kind through openings of this equipment

as they may touch dangerous voltage points or short out parts that

could result in a fire or electric shock. Never spill liquid of any kind on

the equipment.

11. Servicing

Do not attempt to service this equipment yourself. Refer all servicing

to qualified service personnel.

12. Damage requiring Service

Unplug this equipment from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

A. When the power-supply cord or the plug has been damaged.

B. If liquid is spilled, or objects have hit the equipment.

C. If the equipment has been exposed to rain or water.

D. If the equipment does not operate normally by following the

operating instructions, adjust only those controls that are covered

by the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the equipment to its normal

operation.

E. If the equipment has been dropped, or the cabinet damaged.

F. When the equipment exhibits a distinct change in performance —

this indicates a need for service.

13. Replacement Parts

When replacement parts are required, be sure the service technician

has used replacement parts specified by the manufacturer or that

have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock or other hazards.

14. Safety Check

Upon completion of any service or repairs to this equipment, ask the

service technician to perform safety checks to determine that the

equipment is in proper operating condition.

15. Field Installation

This installation should be made by a qualified service person and

should conform to all local codes.

16. Tmra

A manufacturer's maximum recommended ambient temperature

(Tmra) for the equipment must be specified so that the customer and

installer may determine a suitable maximum operating environment

for the equipment.