ergochair Ergo-Jet Panduan Perakitan dan Pengguna

Jelajahi secara online atau unduh pdf Panduan Perakitan dan Pengguna untuk Desktop ergochair Ergo-Jet. ergochair Ergo-Jet 2 halaman. Height-adjustable workstation

Halaman Cetak

Ergo-Jet™ Height-Adjustable Worksta on

Assembly and User Guide

Guide P/N: 5900351 Rev. A - June 2023

Ergo-Jet Product Descrip on

The Ergo-Jet (5160112) is a fully height-adjustable worksta on providing increased mobility

on a stable ergonomic pla orm as you work. Gas springs support both the backrest and

the seat allowing a range of 15° to 60° of backrest adjustment and ≈8 inches of height

adjustment on the seat. Adjustable foot and arm rests as well as four 360° swivel casters

allow freedom of movement and comfort while working.

agree that: you will give full a ribu on to BendPak Inc., you will not make changes to the content, you do

not gain any rights to this content, and you will not use the copies for commercial purpose.

Trademarks. Ergochair and the Ergochair logo, BendPak and the BendPak logo are registered trademarks of BendPak Inc. All other company,

product, and service names are used for iden ﬁ ca on only. All trademarks and registered trademarks men oned in this Manual are the

property of their respec ve owners.

Limita ons. Every eﬀ ort has been made to ensure complete and accurate instruc ons are included in this Guide. However, product updates,

revisions, and/or changes may have occurred since this Guide was published. BendPak reserves the right to change any informa on in this

Guide without incurring any obliga on for equipment previously or subsequently sold. BendPak is not responsible for typographical errors in

this Guide. You can always ﬁ nd the latest version of the Assembly and User Guide for your product on the BendPak website.

Warranty. The BendPak warranty is more than a commitment to you: it is also a commitment to the value of your new product. Contact your

nearest BendPak dealer or visit www.bendpak.com/support/warranty for full warranty details.

Go to bendpak.com/support/register-your-product/ and ﬁ ll out the online form to register your product (be sure to click Submit).

Safety. Your Ergo-Jet was designed and manufactured with safety in mind. However, your safety also depends on proper training and

though ul opera on. Do not install, operate, maintain, or repair the unit without reading and understanding this User Guide and the labels

on the unit; do not use the Ergo-Jet Worksta on unless you can do so safely!

Ergo-Jet Safety Informa on

•

Please read this en re guide prior to use. Failure to follow the instruc ons and safety precau ons in this guide can result in serious

injury. By proceeding with setup and opera on, you agree that you fully understand the contents of this guide and assume full

responsibility for the use of this product. Always inspect the Ergo-Jet for loose or damaged components prior to each use. If a problem

exists resolve the issue. If the issue cannot be resolved, cease all use and contact your authorized Ergochair parts provider.

•

Always be alert and aware of dangers around you while using this equipment.

•

Only use the Ergo-Jet on hard, ﬂ at surfaces.

•

Always sit down on the Ergo-Jet gently. Avoid shock loads caused by jumping or falling onto the seat.

•

Never stand on the Ergo-Jet or use it for a purpose for which it was not designed.

•

Do not allow unsupervised children or persons to use this product.

•

This product is not a toy. Never use as a skateboard or dolly.

•

Beware of all pinch and crush hazards when adjus ng the seat and backrest posi on on this product, keep hands

and feet clear.

•

Be aware that the Maximum Weight limit for the Ergo-Jet is 350 lbs. / 159 kg. Do not remove and hold Vehicle components that, when

combined with your own weight, exceed this maximum weight ra ng.

•

Replace warning labels that are damaged or illegible.

•

Do not operate your Ergo-Jet if you ﬁ nd maintenance issues or it operates in an abnormal manner, take it out of service, then contact

BendPak Technical Support, email [email protected] or call (800) 253-2363 op on 7, then 4.

California Proposi on 65: This product can expose you to chemicals including styrene and vinyl chloride, which are on the list of over

900 chemicals iden ﬁ ed by the State of California to cause cancer, birth defects, or other reproduc ve harm. Always use this product in

accordance with BendPak Ergochair's instruc ons. For more informa on, visit www.p65warnings.ca.gov.

Ergo - Jet Speciﬁ ca ons:

Length

Seat Width

Width

Arm Rest Width

Headrest Width

Arm Rest Height

Min. Backrest Angle ≈15°

Backrest Angle max. ≈60°

Foot Rest Height

Seat Height Range

Backrest Height

Ground Clearance

1645 Lemonwood Drive

Santa Paula, CA 93060 USA

(800) 253-2363  www.bendpak.com

35.25 in. (backrest up) to 47 in. (backrest down) /

894 mm (backrest up) to 1,194 mm (backrest down)

14.8 in. / 376 mm

33.5 in. / 850 mm

24 in. to 29 in. / 610 mm to 737 mm

17.8 in. / 452 mm

27 in. to 36.5 in. / 686 mm to 927 mm

8.5 in. to 11 in. / 216 to 279 mm

18.75 to 26.75 in. / 476 to 679 mm

43.75 to 51.75 in. / 1,111 mm to 1,314 mm

2.5 in. to 4 in. / 63.5 mm to 10 mm

Assembly and User Guide

P/N : 5900351 - Rev. A - June 2023

•

Weight: 158.7 lbs. / 72 kg.

•

Backrest and Seat Adjustment: Gas Spring

•

Casters: Four 360° Casters (2 locking), Ø75 mm x

25 mm, sleeve bearings, oil resistant, non-marring

rubber wheels

•

Seat Materials: Padded Marine Vinyl Backrest and

Seat. Marine Vinyl is abrasion, chemical and oil

resistant

•

Tool/Parts Tray: Rugged steel tray for tools and

parts. 1.25 in. / 32 mm deep.

•

Frame Materials: Full powder coated, welded

tubular steel