Clarion UNGO PRO SECURITY K20 Panduan Instalasi - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alarm Mobil Clarion UNGO PRO SECURITY K20. Clarion UNGO PRO SECURITY K20 14 halaman. Clarion k20 cctv systems: installation guide
Juga untuk Clarion UNGO PRO SECURITY K20: Panduan Pemilik (19 halaman)
Halaman Cetak
System Features Menus
Note: Factory default settings are shown in BOLD.
Note: For feature number 1-4, the 3.5 second door lock pulse setting the horn will honk twice (if
connected), for the 0.4 second door lock pulse setting the horn will honk (if connected) three
times.
Feature Descriptions
The features of the system are described below.
1 IGNITION CONTROLLED DOOR LOCK ON/OFF: When turned on, the doors will lock three seconds after the ignition is turned on.
2 IGNITION CONTROLLED DOOR UNLOCK ON/OFF: When turned on, the doors will unlock when the ignition is turned off.
3 IGNITION CONTROLLED DOMELIGHT: If turned on, the system will turn on the domelight for 30 seconds when the ignition is turned
off. The domelight supervision output (H1/4) wire must be connected to an optional relay as described in the Primary Harness Wire Connection
Guide.
4 DOOR LOCK PULSE DURATION: Some European vehicles, such as Mercedes-Benz and Audi, require longer lock and unlock pulses to
operate the vacuum pump. Programming the system to provide 3.5 second pulses will accommodate the door lock interface in these vehicles. The
default setting is 0.8 second door lock pulses. For some vehicles a 0.4 second pulse duration is required, this durations is required for some vehi-
cles to prevent the windows from moving.
5 DOUBLE PULSE UNLOCK OFF/ON: Some vehicles require two pulses on a single wire to unlock the doors. When the double pulse unlock
feature is turned on, the BLUE/BLACK H1/8 wire will supply two pulses instead of a single pulse.
6 DOUBLE PULSE LOCK OFF/ON: Selectable 2 pulse door lock output to operate vehicle equipped with factory "deadbolt". Will have similar
operation to that of the Double Pulse Unlock feature, but will perform the functions on the Lock wire as opposed to the Unlock wire.
7 COMFORT CLOSURE FEATURE OFF/ON : This feature is designed to integrate with vehicles that can close the power windows and
sunroof by holding the key in the driver door lock position, and will operate on both single input systems and two pulses input dead bolt systems.
If programmed ON the door lock output will activate the Comfort Close output for 20 seconds. This output will begin 200mS after the final
door lock output has completed regardless of the door lock programming.
If while the 20 second timer is active and closing the windows the user disarms the unit, the Comfort Close output will immediately cease before
the doors unlock.
8 CODE-HOPPING ON/OFF: The system features Code-Hopping as an option.
10
Feature
Default LED ON Setting
Number
(Press Channel 1)
1
Ignition-controlled door lock ON
2
Ignition-controlled door unlock ON
3
Ignition-controlled domelight ON
4
0.8 second door lock pulses
5
Double pulse unlock OFF
6
Double pulse lock OFF
7
Comfort closure OFF
8
Code Hopping ON
LED OFF Setting
(Press Channel 2)
Ignition-controlled door lock OFF
Ignition-controlled door unlock OFF
Ignition-controlled domelight OFF
3.5 second door lock pulses/0.4 sec.
Double pulse unlock ON
Double pulse lock ON
Comfort closure ON
Code Hopping OFF