Alda SAA 713 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pemanas Alda SAA 713. Alda SAA 713 4 halaman. Ptc heater

Thermostat

Knob

Oscillation

Switch

Heater

Element

HOW TO USE YOUR PTC HEATER

Place the heater on the floor at least 50cm away from the wall and any other

objects such as furniture, curtains or plants. (Make sure the power supply used

corresponds to the one on the rating label). Place the PTC Heater on a firm

level surface. Switch ON the mains button behind the unit.

Thermostat: The desired room temperature can be adjusted using the

thermostat. Simply turn the thermostat knob clockwise, to increase the heat,

and anti-clockwise to decrease the temperature.

Function Selector Knob: The knob has 4 possible settings:

: Off

: FAN - This setting is for summer service and the fan blows cool air

: Low Heating (750W)

: High Heating (1500W)

OSC: The heater oscillates continuously to a radius of 70 degrees on selection

of this function.

OVERHEAT PROTECTION

An overheat protection switches off the appliance automatically in case of

overheat, e.g. due to total or partial obstruction of the grids. In this case,

unplug the appliance, wait about 30 minutes for it to cool and remove the

object which is obstructing the grids. Then switch it ON as decribed above.

KNOW YOUR PTC HEATER

Function

Selector Knob

ON / OFF

Indicator

Stand