Xerox 1235/DX - Phaser Color Laser Printer Manual Jaringan - Halaman 11
Jelajahi secara online atau unduh pdf Manual Jaringan untuk Printer Xerox 1235/DX - Phaser Color Laser Printer. Xerox 1235/DX - Phaser Color Laser Printer 34 halaman. Network guide
Juga untuk Xerox 1235/DX - Phaser Color Laser Printer: Brosur & Spesifikasi (4 halaman)
Halaman Cetak
21.
Send a print job to the printer.
22.
Check the print job for print-quality. If print-quality problems
exist, use the print-quality section of your printer's Advanced
Features and Troubleshooting Manual to correct the problem.
23.
If your print job did not print, see the Troubleshooting section for
your operating system in the Technical Information Guide to
correct the problem.
Note
Printers connected to a Windows NT network with TCP/IP
protocol enabled can use a web browser to monitor and
configure your printer. Refer to the section in this document
entitled Internet Printer Services.
Note
For installing or managing multiple printers on a Windows
NT network with TCP/IP protocol enabled, you can use the
Xerox CentreWare MC snap-in to Microsoft Management
Console. Refer to the Xerox CentreWare MC User Guide.
Quick install steps (AppleTalk protocol)
1.
At the Desktop, right-mouse-click the Network Neighborhood
icon and select Properties.
Click the Protocols tab and verify that the AppleTalk protocol has
2.
been loaded.
3.
If the AppleTalk software is not present, install it using the
documentation provided by Microsoft. Then return to this
document.
4.
Open the Control Panel and double-click the Printers icon.
5.
Double-click Add Printer; the Add Printer Wizard starts.
6.
Verify that My Computer is selected and click Next>.
Click Add Port.
7.
8.
Select the AppleTalk Printing Devices and click New Port.
9.
Click Ethernet and select the device.
10.
Choose your printer device from the list, then click OK.