Xerox 3400N - Phaser B/W Laser Printer Manual Jaringan - Halaman 16

Jelajahi secara online atau unduh pdf Manual Jaringan untuk Printer Xerox 3400N - Phaser B/W Laser Printer. Xerox 3400N - Phaser B/W Laser Printer 21 halaman. Network guide
Juga untuk Xerox 3400N - Phaser B/W Laser Printer: Brosur (4 halaman)

Halaman Cetak

EtherTalk Configuration

If the Configuration Sheet shows the correct printer name and zone but the printer is still

not visible in the Chooser, check the following items:

1. If there is a Novell NetWare server on the network, verify that the NetWare

server has been configured for AppleTalk Phase 2 routing and addressing.

If there is a Windows NT server on the network, verify that the printer has not

been captured by a Windows NT machine.

If the printer continually reboots when connected to the network, it is possible

that a router is broadcasting a zone of *, which is an invalid zone.

Changing the printer's name

The printer's name is displayed on the Configuration Sheet. The printer's default name is

Xer0000f0axxxxx (with x representing a hexadecimal number). The name also appears in

the Chooser. The name can be up to 31 characters long. It may contain any printable

characters; however, the characters @ : = * are deleted from the name used on AppleTalk.

A change is persistent across printer power cycles.

You can change the printer name by using the Phaser 3400 web server:

Open the Internet Explorer web browser (version 4.0 or higher).

For the Address, type http://, then the IP address of the Phaser 3400 printer, then

press the Enter key. For example, if the IP address is 192.25.26.81, type:

http://192.25.26.81

On the main page, click the Admin button, then select AppleTalk.

If desired, change the printer name and description.

Click the Apply button.

Changing the printer's EtherTalk zone

You can use the Phaser 3400 web server to change the EtherTalk zone: