Xerox 6180DN - Phaser Color Laser Printer Panduan Pengguna - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Xerox 6180DN - Phaser Color Laser Printer. Xerox 6180DN - Phaser Color Laser Printer 32 halaman. 26-ppm monochrome/ 20-ppm color
Juga untuk Xerox 6180DN - Phaser Color Laser Printer: Panduan Instalasi (34 halaman), Lembar Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Catatan Rilis (2 halaman), Instal Manual (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Memulai (34 halaman), Panduan Instalasi dan Pengoperasian (8 halaman), Spesifikasi (4 halaman), Manual (28 halaman)

Setting the font resolution

Font name and format

LCDS

PCL

LCDS

PCL

MICR User Guide

Before printing MICR jobs, you must set the resolution attribute

appropriately for the queue to which you will be sending the jobs.

The following table lists the different MICR font formats and the

resolution at which each font should be printed.

Table 1-3. MICR Font formats

Required resolution

E13B

300 DPI

300 DPI and 600 DPI

300 and 600 DPI

CMC7

300 DPI

600 DPI

If your document contains scalable fonts or simple line art

generated at 600 dpi, the differences between printing at 300 or

600 dpi are subtle. However, if your document contains bitmaps

with a resolution of 600 dpi, printing at 300 dpi causes a

degradation of image quality. To preserve image quality,

regenerate the bitmaps at 300 dpi.

NOTE: PCL and PostScript fonts must be printed at the correct

queue resolution and with the correct resource resolution, or

errors will occur. In PCL, this causes a minro spacing error. In

PostScript, subtle but significant character distortions occur. See

Selecting Fonts for more information.

For the Nuvera MX printers, a 300 DPI queue is not an available

option. Printing using the 1200 DPI queue works fine as long as

the 600 DPI fonts are used.