Xerox 6180N - Phaser Color Laser Printer Panduan Memulai - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Printer Xerox 6180N - Phaser Color Laser Printer. Xerox 6180N - Phaser Color Laser Printer 34 halaman. Color laser printer
Juga untuk Xerox 6180N - Phaser Color Laser Printer: Panduan Instalasi (34 halaman), Lembar Spesifikasi (2 halaman), Panduan Pengguna (32 halaman), Panduan Pengguna (28 halaman), Instal Manual (2 halaman), Manual Keamanan (38 halaman), Catatan Rilis (2 halaman), Instal Manual (2 halaman), Panduan Memulai (37 halaman), Manual (34 halaman), Manual (34 halaman), Panduan Pengguna (32 halaman), Panduan Instalasi dan Pengoperasian (8 halaman), Panduan Evaluator (16 halaman), Spesifikasi (4 halaman)

Xerox 6180N - Phaser Color Laser Printer Panduan Memulai

Notes and Caveats

DocuSP Controller

15
3. DocuSP 4.2 Software Release
Information
The sections in this chapter cover known issues with the
DocuSP 4.2 software and supporting applications.
The following table details the caveats for the DocuSP 4.2
software and indicates which, or all, printer products to which
the caveat applies.
These caveats are planned to be fixed in a future release of
the DocuSP software. If you encounter one of these caveats
that impact your print production, contact your Xerox support
representative.
Caveat
The LCDS Tape Client updates were
incorrectly documented as being available in
earlier versions of the Getting Started and in
the 4.1 to 4.2 Differences Document. The
Tape Client updates are not available in this
release of DocuSP.
For optimal operation of the DocuSP IPDS,
follow these guidelines:
1. Do not Pause the printer to continue
RIPping a job while deferring printing.
Continue the processing and printing of
an IPDS job before attempting to print
another job.
2. Do not use Reposition Output on an IPDS
job.
3. Select 1 to N printing as a default. If N to
1 printing is necessary, set the maximum
set size for the finisher to the actual
finisher capacity, and do not direct jobs to
the finisher that are larger than the
finisher can accommodate.
Specific printer status problems are not
described with Intervention Required
messages. Only a generic message is sent.
Ensure that the print shop management
process does not depend upon the printer
providing a specific description of the error.
Applicable printer product
All applicable LCDS printers
All applicable IPDS printers
All applicable IPDS printers