Direct IP Idis DR-3116PS Panduan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Perangkat Keras Jaringan Direct IP Idis DR-3116PS. Direct IP Idis DR-3116PS 17 halaman.

Halaman Cetak

Safety Precautions

Important Safeguards

1. Read Instructions

All the safety and operating instructions should be read before the

appliance is operated.

2. Retain Instructions

The safety and operating instructions should be retained for future

reference.

3. Cleaning

Unplug this equipment from the wall outlet before cleaning it. Do not use

liquid aerosol cleaners. Use a damp soft cloth for cleaning.

4. Attachments

Never add any attachments and/or equipment without the approval of the

manufacturer as such additions may result in the risk of fire, electric shock or

other personal injury.

5. Water and/or Moisture

Do not use this equipment near water or in contact with water.

6. Ventilation

Place this equipment only in an upright position. This equipment has an

open-frame Switching Mode Power Supply (SMPS), which can cause a fire

or electric shock if anything is inserted through the ventilation holes on the

side of the equipment.

7. Accessories

Do not place this equipment on an unstable cart, stand or table. The

equipment may fall, causing serious injury to a child or adult, and serious

damage to the equipment. Wall or shelf mounting should follow the

manufacturer's instructions, and should use a mounting kit approved by

the manufacturer.

This equipment and cart combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may cause the equipment and

cart combination to overturn.

8. Power Sources

This equipment should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of power,

please consult your equipment dealer or local power company.

You may want to install a UPS (Uninterruptible Power Supply) system for

safe operation in order to prevent damage caused by an unexpected power

stoppage. Any questions concerning UPS, consult your UPS retailer. This

equipment should be remain readily operable.

9. Power Cords

Operator or installer must remove power and TNT connections before

handling the equipment.

10. Lightning

For added protection for this equipment during a lightning storm, or when

it is left unattended and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system. This will prevent

damage to the equipment due to lightning and power-line surges.

11. Overloading

Do not overload wall outlets and extension cords as this can result in the risk

of fire or electric shock.

12. Objects and Liquids

Never push objects of any kind through openings of this equipment as they

may touch dangerous voltage points or short out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the equipment.

13. Servicing

Do not attempt to service this equipment yourself. Refer all servicing to

qualified service personnel.

14. Damage requiring Service

Unplug this equipment from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

A. When the power-supply cord or the plug has been damaged.

B. If liquid is spilled, or objects have fallen into the equipment.

C. If the equipment has been exposed to rain or water.

D. If the equipment does not operate normally by following the operating

instructions, adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to

restore the equipment to its normal operation.

E. If the equipment has been dropped, or the cabinet damaged.

F. When the equipment exhibits a distinct change in performance - this

indicates a need for service.

15. Replacement Parts

When replacement parts are required, be sure the service technician has

used replacement parts specified by the manufacturer or that have the

same characteristics as the original part. Unauthorized substitutions may

result in fire, electric shock or other hazards.

16. Safety Check

Upon completion of any service or repairs to this equipment, ask the service

technician to perform safety checks to determine that the equipment is in

proper operating condition.

17. Field Installation

This installation should be made by a qualified service person and should

conform to all local codes.

18. Correct Batteries

Warning: Risk of explosion if battery is replaced by an incorrect type. This

equipment should be remain readily operable. Dispose of used batteries

according to the instructions. The battery shall not be exposed to excessive

heat such as sunshine, fire or the like.

19. Tmra

A manufacturer's maximum recommended ambient temperature (Tmra)

for the equipment must be specified so that the customer and installer may

determine a suitable maximum operating environment for the equipment.

20. Elevated Operating Ambient Temperature

If installed in a closed or multi-unit rack assembly, the operating ambient

temperature of the rack environment may be greater than room ambient.

Therefore, consideration should

be given to installing the equipment in an

environment compatible with the manufacturer's maximum rated ambient

temperature (Tmra).

21. Reduced Air Flow

Installation of the equipment in the rack should be such that the amount of

airflow required for safe operation of the equipment is not compromised.

22. Mechanical Loading

Mounting of the equipment in the rack should be such that a hazardous

condition is not caused by uneven mechanical loading.

23. Circuit Overloading

Consideration should be given to connection of the equipment to supply

circuit and the effect that overloading of circuits might have on over current

protection and supply wiring. Appropriate consideration of equipment

nameplate ratings should be used when addressing this concern.

24. Reliable Earthing (Grounding)

Reliable grounding of rack mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct

connections to the branch circuit (e.g., use of power strips).