Xerox 7760DN - Phaser Color Laser Printer Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Xerox 7760DN - Phaser Color Laser Printer. Xerox 7760DN - Phaser Color Laser Printer 35 halaman. A3 colour laser printer
Juga untuk Xerox 7760DN - Phaser Color Laser Printer: Panduan Tambahan (16 halaman), Setup Manual (2 halaman), Panduan Referensi Cepat (5 halaman), Panduan Evaluator (20 halaman), Lembar Instruksi (6 halaman), Lembar Instruksi (14 halaman), Perbandingan Kompetitif (2 halaman), Perbandingan Kompetitif (1 halaman), Brosur & Spesifikasi (4 halaman)

Creating Custom

TekColor Corrections

The Phaser printer should have been calibrated using one of the methods mentioned previously

in this document before creating new TekColor corrections. When the printer has been color

calibrated you can create and use custom TekColor corrections.

To create a TekColor correction using a Phaser printer ICC profile and a target device ICC

profile:

Launch the PhaserMatch application.

Click the Create Profile button in the main PhaserMatch screen.

Create a device link profile, see

Create a new custom TekColor correction; see

page 3-2.

PhaserMatch software enables you to perform color matching between two devices: your

Phaser color printer and another output device such as a printing press or another printer. It

does this through the creation of a Device Link Profile (DLP). A device link profile is an ICC

profile that combines the color information about the printer and the target device into one file.

Creating device link profiles enables you to alter the colors printed by your Phaser printer so

they more closely match the colors produced by the output device of your choice.

PhaserMatch works with the following types of profiles.

■

Phaser printer ICC profiles that get installed as part of the standard installation.

■

Phaser printer ICC profiles that get installed as part of the optional software install. These

are ICC profiles that simulate the TekColor corrections that are already in the printer such

as Commercial Press and SWOP Press.

■

Target device ICC profiles that get installed with the standard installation.

■

Target device ICC profiles that get installed with the optional software installation.

■

ICC Profiles created in a third-party profile creation software.

Creating Device Link Profiles

PhaserMatch and PhaserCal 4.0 User Guide

3-1

on page 3-1.